1. Home
    2. /
  2. Manuals
    3. /
  3. UStec
    4. /
  4. TP-IPR8
    5. /
  5. 9
Page 41 / 99 Scroll up to view Page 36 - 40
UStec Structured Wiring User Manual
41
1600 Series For CATV
1600 Series For CATV
The 1600 series is designed for homes wired with UStec 2X2 tecWire for up to
16 multimedia tecPort locations. The tecLAN1600Basic models and higher
include a digital CATV amplifier with a built-in high pass filter to eliminate
potential interference with cable channels from in-home generated VCR,DVD
or camera channels. Up to 20 phone locations may be provided, each with 4
phoneline capacity. The optional holsters provide a hinged mounting bracket
for cable modems, DSL modems and home server appliances.
(Holster stan-
dard on iLAN systems)
Common to all systems is the large UX-10x cabinet and the smaller UX-75x
cabinet. The larger cabinet houses the RF and telecommunications modules,
while the smaller cabinet handles the data communications. Each cabinet
houses an electrical outlet in the lower right hand corner to power UStec and
third part peripherals.
Each system is enclosed in a integrated plastic cover and drywall trim kit.
Each cover can be locked with the addition of the cover locking kit, part
number UX-408.
For satellite connectivity a CX-DSS58 module can be added for high-defini-
tion capable satellite in 8 locations. Contact your dealer for more informa-
tion.
tecReady 1600
This system uses the UX-222 service module and is designed to distribute an
off-air or cable television signal and distribute it in up 16 different locations
in the home. It can accept up to four telephone lines and distribute them to
10 different locations in the home. Additionally it has a RJ31X line grabbing
interface for a security panel. This system can be upgraded to any of the fol-
lowing systems. This system can be upgraded to any (CATV/SAT or CATV
only) series 1600 system.
Page 42 / 99
42
UStec Structured Wiring Users Manual
tecLAN 1600 Basic
This system is designed to distribute the off-air or cable television signal to 16
different locations in the home. The CX-AMP16 is a studio quality amplifier
built to the highest standards that cable companies require.
The off-air antenna or cable television service enter the input on the CX-
AMP16. The amplifier then amplifies the signal enough to cover the splitting
of the signal and sends it out to 16 different television locations via the TV
out ports. The 16 outputs are tiered into two banks of 8. One set of banks has
a higher output for the longer runs typical in a 16 port configuration.
Additionally there are 16 internal inputs for the input of in home generated
signals. The system has two 8 way internals
(16 total)
to take in home gener-
ated signals from an optional RF modulator and pass them for distribution to
all rooms in the home. Examples might be a DVD player that you would also
like to see in the bedroom.
The two TP-DM10R telecom modules will distribute up to 4 incoming tele-
phone lines out to 19 different locations in the home. This device can be
upgraded to any of the 1600 series systems.
Page 43 / 99
UStec Structured Wiring User Manual
43
1600 Series For CATV
tecLAN 1600
This system is designed to distribute the off-air or cable television signal to 16
different locations in the home. The CX-AMP16 is a studio quality amplifier
built to the highest standards that cable companies require.
The off-air antenna or cable television service enter the input on the CX-
AMP16. The amplifier then amplifies the signal enough to cover the splitting
of the signal and sends it out to 16 different television locations via the TV
out ports. The 16 outputs are tiered into two banks of 8. One set of banks has
a higher output for the longer runs typical in a 16 port configuration.
Additionally there are 16 internal inputs for the input of in home generated
signals. The system has two 8 way internals
(16 total)
to take in home gener-
ated signals from an optional RF modulator and pass them for distribution to
all rooms in the home. Examples might be a DVD player that you would also
like to see in the bedroom.
Up to 4 incoming telephone lines are plugged into the TP-IN4RS module.
This device will surge protect all 4 incoming telephone lines and distribute
them to 20 different locations via two TP-DM10R modules.
Additionally the TP-IN4RS module provides security line grabbing interfaces
(RJ31X) on telephone lines 1 and 2. This module also provides a conduit to
Key System telephone Units (KSU). This system can be upgraded to any 1600
series system.
Page 44 / 99
44
UStec Structured Wiring Users Manual
iLAN 1600
This system is designed to distribute the off-air or cable television signal to 16
different locations in the home. The CX-AMP16 is a studio quality amplifier
built to the highest standards that cable companies require.
The off-air antenna or cable television service enter the input on the CX-
AMP16. The amplifier then amplifies the signal enough to cover the splitting
of the signal and sends it out to 16 different television locations via the TV
out ports. The 16 outputs are tiered into two banks of 8. One set of banks has
a higher output for the longer runs typical in a 16 port configuration.
Additionally there are 16 internal inputs for the input of in home generated
signals. The module has an integrated internals to take in home generated
signals from an optional RF modulator and pass them for distribution to all
rooms in the home. Examples might be a DVD player that you would also
like to see in the bedroom.
Up to 4 incoming telephone lines are plugged into the TP-IN4RS module.
This device will surge protect all 4 incoming telephone lines and distribute
them to 20 different locations via two TP-DM10R modules. Additionally the
TP-IN4RS module provides security line grabbing interfaces (RJ31X) on tele-
phone lines 1 and 2. This module also provides a conduit to Key System tele-
phone Units (KSU).
In the small cabinet (UX-75x) is an iLAN 16B which consists of four 10/100
Ethernet switches for a total sixteen Ethernet ports. It provides for the connec-
tion of up to 16 different computers in addition to a broadband sharing
device that is mounted in the included gateway holster.
The flexible holster design is capable of handling a host of broadband devices
from cable modem routers, xDSL routers, even third party servers.
Page 45 / 99
UStec Structured Wiring User Manual
45
1600 Series For Satellite / CATV or Antenna
1600 Series For Satellite / CATV or Antenna
The 1600 satellite series provides complete choice of HDTV satellite, and
CATV or off-air broadcast TV in one system. Up to 8 high definition and 16
cable or off-air ports can be accommodated with these systems. The iSAT1600
Series includes an expansion cabinet for the computer networking compo-
nents.
Common to all systems is the large UX-10x cabinet and the smaller UX-751
cabinet. The larger cabinet houses the RF and telecommunications modules,
while the smaller cabinet handles the data communications. Each cabinet
houses an electrical outlet in the lower right hand corner to power UStec and
third part peripherals.
Each system is enclosed in a integrated plastic cover and drywall trim kit.
Each cover can be locked with the addition of the cover locking kit, part num-
ber UX-408.

Rate

4.5 / 5 based on 2 votes.

Popular UStec Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top