Ubee Interactive

Using the Diagnostics Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

27

4.4.2

Using the Traceroute Option

The

Traceroute

utility determines the IP addresses of hosts in the network path. By

checking the Resolve Host names box, Traceroute tries to find which name matches the

address. Some hosts have no names, and might still be shown as IP addresses, even if

this option is active.

Steps

To trace host IP addresses along a route:

1.

Click

Status

from main menu.

2. Click

Diagnostics

from the left side menu.

3. Choose

Traceroute

from the Utility drop-down menu.

4. Enter new parameter values or accept the default values.

5. Click

Start Test

. Field descriptions are listed below the screen example.

Ping Interval

Defines the interval between ping operations in milliseconds.

Start Test

Abort Test

Clear Results

Defines what action to take.



Start Test begins the ping.



Abort Test stops the ping.



Clear Results deletes previous test results in the Results

table.

Results

Displays the results of the ping test.

Label

Description

Ubee Interactive

Using the Diagnostics Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

28

Utility

Provides a drop-down menu to choose Ping or Traceroute.

Traceroute Parameters

Target

Defines the specific IP address or domain (for example,

ubeeinteractive.com) to which you want to trace a route.

Max Hops

Defines the maximum number of hops. Hops are the number

of routers the traceroute traverses. Default is 30.

Data Size

Defines the data size to send for the traceroute operation.

Default is 64.

Base Port

Defines the destination port number. Default is 33434.

Resolve Host

Enables (on) or disables (off) this option. When checked,

traceroute tries to find the name that matches the IP address.

Default is Off.

Start Test/Clear Results

Defines what action to take.



Start Test begins the traceroute.



Clear Results deletes previous test results in the Results

table.

Results

Displays the results of the trace.

Ubee Interactive

Using the User Default Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

29

4.5

Using the User Default Option

The

User Default

option allows you to restore factory defaults to the Firewall and Access

Control settings. All other networking settings are not cleared and reset (for example,

wireless settings).

Steps

To restore user defaults:

1.

Click

Status

from the main menu.

2. Click

User Default

from the left side menu. Field descriptions are listed below the

screen example.

Label

Description

Restore User Defaults

Restores settings to factory defaults. Select Yes then Apply to

reset the device to the default Firewall and Access Control

Content filter settings. This operation does not require a reset

(power cycle) of the system.

Reset The System

Resets the system. Select Yes to power cycle the device.

When you select Apply, you will be notified that the DVW326

has been reset. Click RELOAD

. The Login screen will then

appear.

Apply

Applies the options selected on this screen.

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

30

5

Understanding the Basic Menu

Basic gateway options provide the majority of configuration for the device including WAN

IP addresses, LAN IP addresses, and DHCP. Advanced gateway options provide settings

like MAC filtering and port forwarding.

Topics

See the following topics:



Using the Setup Option on page 30



Using the DHCP Option on page 32



Using the DDNS Option on page 34



Using the Backup Option on page 35

Steps

To access the basic menu:

1.

Access the Web user interface. Refer to

Accessing the Web User Interface Locally on

page 18

.

2. Click

Basic

from the main menu.

5.1

Using the Setup Option

Use the

Setup

option to configure common gateway parameters.

Steps

To configure setup options:

1.

Click

Basic

from the main menu.

2. The

Setup

screen is displayed. Field descriptions are listed below the screen

example.

Ubee Interactive

Using the Setup Option

Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide

•

March 2014

31

Label

Description

LAN

IP Address

Defines the local IP address, which is the default gateway

address for all wired LAN hosts that connect to the DVW326.

MAC Address

Displays the LAN interface’s hardware address.

Interface/Prefix

None Specified

Indicates no interface or prefix has been specified.

WAN

IP Address

Displays the current WAN public IP address obtained from the

service provider.

MAC Address

Displays the WAN interface’s hardware address.

Duration

Displays the accumulated time since successfully acquiring a

WAN public IP address.

Expires

Displays the remaining time before the WAN IP address

expires, if applicable.

IPv4 DNS Servers

Lists the DNS servers available on the network.

Release WAN Lease

Releases the WAN public IP address when clicked.

Renew WAN Lease

Renews the WAN IP address when clicked.