1. Home
    2. /
  2. Manuals
    3. /
  3. Ubee
    4. /
  4. DDW3610
    5. /
  5. 5
Page 21 / 70 Scroll up to view Page 16 - 20
Ubee Interactive
3.5
Cable Modem - Operation Config
DDW3612 Subscriber User Guide
•
July, 2010
17
Label
Description
Network Access
Displays the status of cable modem, Denied means no
connectivity is established. Allowed means connectivity is
established to Internet.
Maximum Number of CPEs
Displays the maximum number of Ethernet devices that
can be connected (LAN side) to access the
network/internet at the same time.
Baseline Privacy
Displays highlighted device configurations, like PHS
Enabled and the other examples shown in the screen
example.
DOCSIS Mode
Displays the DOCSIS version used in the device.
Primary Downstream Service Flow
SFID
Displays the frequency ID of the downstream service flow.
Priority
Displays the use priority of the frequency ID.
Max Traffic Rate
Displays the max data rate as enabled by the service
provider.
Max Traffic Burst
Displays the max data rate as enabled by the service
provider for downstream data bursts.
Max Concatenated Burst
Displays the max data rate per downstream burst.
Primary Upstream Service Flow
SFID
Displays the frequency ID of the upstream service flow
Priority
Displays the use priority of the frequency ID.
Max Traffic Rate
Displays the max data rate as enabled by the service
provider.
Max Traffic Burst
Displays the max data rate as enabled by the service
provider for upstream data bursts.
Min Traffic Rate
Displays the minimum data rate as enabled by the service
provider.
Max Concatenated Burst
Displays the max data rate per upstream burst.
Scheduling Type
Displays the data scheduling type.
Page 22 / 70
3.6
Cable Modem - Event Log
Ubee Interactive
18
DDW3612 Subscriber User Guide
•
July, 2010
3.6
Cable Modem - Event Log
This section explains how to use the
Event Log
screen of the web interface. The
Event Log
screen displays log information that may be useful to diagnose operational
issues with the device.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Event Log
link from the left side of the screen. Field explanations are
listed below the following screen example.
Label
Description
First Time
Displays the time of the event.
Last Time
Displays the last time of the event.
Priority
Displays the event log severity.
Description
Displays a detailed description of the event log.
Refresh
Refreshes the event log record.
Page 23 / 70
Ubee Interactive
3.7
Gateway
DDW3612 Subscriber User Guide
•
July, 2010
19
3.7
Gateway
This chapter explains how to use the
Gateway
functions
of the web interface. The
Gateway functions provide the majority of configuration for the device including WAN
IP addresses, LAN IP addresses, DHCP, and DDNS. Also, advanced setting like DMZ,
MAC filtering, and port forwarding are provided.
3.7.1
Gateway - Information
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Gateway
link from the top of the screen. Then select
Information
.
3. The
Information
fields are defined following this screen example.
Label
Description
Internet Settings
Gateway MAC Address
Displays the Media Access Control (MAC) address of the
residential gateway.
Internet IP Address
Displays the Internet IP address obtained from the service
provider.
Subnet Mask
Displays the subnet mask of the Internet IP address.
Default Gateway
Displays the default gateway IP address.
DNS
Displays the DNS server IP address.
DHCP Remaining Time
Displays the remaining DHCP lease time before expiration
Refresh
Click to refresh the information.
Page 24 / 70
3.7
Gateway
Ubee Interactive
20
DDW3612 Subscriber User Guide
•
July, 2010
Local Settings
Gateway IP Address
Displays the local IP address of the LAN interface.
Subnet Mask
Displays the subnet mask value.
DHCP Server
Displays the status of the DHCP sever feature
(Enabled/Disabled).
NAT
Displays the status of the NAT feature (Enabled/Disabled).
Wireless Status
Displays the status of the wireless feature
(Enabled/Disabled).
Operating Mode
Displays what mode the router is working in (Bridge, NAT,
Router, or NAT Router).
Note
: Firewall menu options are
not available when the device is in Bridge mode. Firewall
options are available only when the device is in NAT,
NATRoute, or Route modes.
Private IP Range
Displays the private IP address assigned to DHCP client.
Public IP DHCP Server
Range
Displays the Public IP DHCP Server Range.
Public IP Total Range
Displays the Public IP DHCP Server Range.
System Up-Time
Displays the accumulated time since the last power cycle.
Label
Description
Page 25 / 70
Ubee Interactive
3.7
Gateway
DDW3612 Subscriber User Guide
•
July, 2010
21
3.7.2
Gateway - Setup
The
Setup
option allows you to make basic configurations to the device.
1.
Access the web interface. Refer to
page 7
, if needed.
2. Click the
Gateway
link from the top of the screen.
3. Click
Setup
from the left side of the screen. The
Setup
fields are explained
following this screen example.
Label
Description
LAN IP Address
Defines the local IP address, which will be the default
gateway address for all wired LAN hosts that connect to
the DDW3612 Wireless Cable Modem Gateway.
LAN MAC Address
Displays the LAN interface’s hardware address.
WAN IP Address
Displays the current WAN public IP address that is
obtained from the service provider.
WAN MAC Address
Displays the WAN interface’s hardware address.
Duration
Displays the accumulated time since successfully acquiring
a WAN public IP address.
Expires
Displays the remaining time before the expiration of the
WAN IP address, if applicable.
Release WAN Lease
Click to release the WAN public IP address.
Renew WAN Lease
Click to renew the WAN IP address.
Refresh
Click to refresh the status of this page.

Rate

2.5 / 5 based on 2 votes.

Popular Ubee Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top