Page 21 / 28 Scroll up to view Page 16 - 20
18
-Tilgin HG1350, HG1550 series Quick Guide
9. Technical Specifications
Dimensions
BxHxD = 282x174x36
Weight
0.65 Kilograms
Operating voltage
See the supplied power adapter
Operating frequency
See the supplied power adapter
Temperature
Operating
0°C to 45°C
32°F to 113°F
Non-operating
-20°C to
60°C/
-4°F
to 140°F
Humidity (relative, non-
condensing)
Operating
10% to 90%
Non-operating
5% to 95%
10. Environmental Information
The equipment you purchased has required the extraction and use of natural
resources for its production. It may contain substances that are hazardous to
your health and to the environment. To avoid putting such substances into our
environment and to reduce pressure on our natural resources, we ask that you
reuse or recycle your end-life equipment by using an accredited electronics take-
back system.
The symbols below indicate that this product should be reused or recycled and
not simply discarded. Please locate and use an appropriate reuse and recycling
site. If you need more information on collection, reuse and recycling systems,
contact your local or regional waste administration. You may also contact your
equipment provider for more information on the environmental performances of
these products.
11. Warranty
No warranty, express or implied, with respect to the product is extended directly
to you from or on behalf of Tilgin IPRG AB. Limited warranties may be granted to
you by the equipment provider in its capacity as reseller of the product. Please
contact your equipment provider for information regarding warranties for the
product.
12. Notice of Copyright and Patent Protection
This product incorporates technology which is copyrighted or patented or
otherwise protected under intellectual property laws and treaties and proprietary
to Tilgin IPRG AB or Tilgin’s third part
y licensors. All use of the products is
subject to the applicable End User License Terms and Conditions provided in
conjunction with the product.
Tilgin WEB version of Quick Guide can deviate from version supplied by Operator
Page 22 / 28
19
-Tilgin HG1350, HG1550 series Quick Guide
13. How to Wall mount the Home Gateway
Wallmounting Instruction
The device can be mounted on the wall.
To install: see below text and figure.C - E
See Drill Guide for wall mounting appended in the gift box, for drilling
correctly spaced holes.
The template shows an outline view of the product with two indicated drill
locations.
A. Mark the drill locations
B. Drill two holes.
C. Screw appropriate screws to the wall where the device is to be placed.
D. Let the bottom of the device face the wall and mount the device on the screws.
E. Connect the cables to the rear panel.
F. For mounting the HG1550 series onto the MSA Fiber Termination Unit,
See
15. Mounting the HG1500 Series on FTU
.
Tilgin WEB version of Quick Guide can deviate from version supplied by Operator
Page 23 / 28
20
-Tilgin HG1350, HG1550 series Quick Guide
Figure.
Mounting the device to the wall:
C
D
E
TI-DEV_IPRG_09_054 Ver A
14. Used Acronymes
DHCP
FTU
GUI
Dynamic Host Configuration Protocol
Fiber Termination Unit
Graphical User Interface
LAN
Local Area Network
PBC Method
Push Button Connect method
PSTN
SSID
Public Switched Telephone Network
Service Set Identifier
WAN
Wide Area Network
WLAN
Wireless Local Area Network
WPA
Wi-Fi Protected Access
WPS
Wi-Fi Protected Setup
Tilgin WEB version of Quick Guide can deviate from version supplied by Operator
Page 24 / 28
21
-Tilgin HG1350, HG1550 series Quick Guide
15.
Mounting the HG1500 series on FTU
Tilgin WEB version of Quick Guide can deviate from version supplied by Operator
Page 25 / 28
-Tilgin HG1350, HG1550 series Quick Guide
Empty page
Tilgin WEB version of Quick Guide can deviate from version supplied by Operator

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top