1. Home
    2. /
  2. Manuals
    3. /
  3. Teracom
    4. /
  4. T2-B-Gawv1 4U10Y-BI
    5. /
  5. 9
Page 41 / 131 Scroll up to view Page 36 - 40
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
38
An ISO Certificed Company
Sample 2: PPP over ATM for IPv6 (PPPoA IPv6)
Step 1
Select
PPP over ATM for IPv6 (PPPoA IPv6)
protocol and set the
encapsulation type to
VC MUX
(depending upon the uplink equipment,
generally
VC MUX
). Then click
Next
.
Step 2
In this example, the modem must be configured as built-in PPPoA + NAT.
Select
Obtain an IP address automatically
,
Enable NAT
, and
Add
Default Route
.
The following table describes the parameters of this page.
Page 42 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
39
An ISO Certificed Company
Field
Description
Obtain an IP address
automatically
Through PPP dial-up to obtain an IP address
assigned by up-link equipment, such as
BRAS.
Use
the
following
IP
address
If you want to manually enter the WAN IP
address, select it and enter the IP address
provided by your ISP.
Enable NAT
Select
it
to
enable
network
address
translation (NAT) function of the modem. If
you do not enable NAT and want to the
modem to access the Internet normally, you
must add a route on the uplink equipment.
Otherwise, the access to the Internet fails.
Normally, it is required to enable NAT.
Add Default Route
Add a default route in the routing table.
Normally, it must be selected. Otherwise, you
have to add a default route manually.
Step 3
Enter the correct broadband user name and password. Select a proper
PPP connection mode. Then click
Next
.
Page 43 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
40
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
Broadband User Name
Enter the correct user name provided by your
ISP.
Password
Enter the correct password provided by your
ISP.
Confirm Password
Confirm the correct password provided by
your ISP.
Session established by
Select a PPP connection mode according to
your practice.
°
Always On
: After the device is powered
on, the system performs PPP dial-up
automatically. If the device is powered
off, DSLAM or the up-link equipment is
abnormal, the PPP connection will not be
broken.
°
Dial on Demand
: After the device is
powered on, the PPP dial-up performs
automatically. If the device does not
detect the flow of the user continuously
within the preset minutes, the device
automatically stops the PPP connection.
Once the device detects the data flow
(for example, accessing the web page), it
restarts the PPP for dial-up.
°
Manually
Connect
:
Choose
Configuration
>
Internet Connection
>
Connections
. Click
Connect
in the
Internet
Connection
Configuration
page to start the PPP connection. If the
device does not detect the data-flow of
the user continuously within the preset
minutes,
the
device
automatically
releases
the
PPP
connection.
The
difference between manually connect
and dial on demand is that you must start
Page 44 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
41
An ISO Certificed Company
Field
Description
a PPP connection manually again if you
select
manually
connect.
Enter
the
waiting time in the field.
Step 4
Click
Next
and the following page appears. In this page, you can confirm
the modification.
Sample 3: PPP over Ethernet (PPPoE)
Step 1
Select
PPP over Ethernet (PPPoE)
protocol. Set to
LLC/SNAP
encapsulation type and
Bridged
encapsulation mode. Then click
Next
.
Page 45 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
42
An ISO Certificed Company
Step 2
In this example, select
Obtain an IP address automatically
,
Enable
NAT
, and
Add Default Route
.
The following table describes the parameters of this page.
Field
Description
Enable/Disable
the
Access
Concentrator
Enable or disable the access concentrator.

Rate

4.5 / 5 based on 2 votes.

Popular Teracom Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top