User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
34
An ISO Certificed Company
Step 2
In this example, the modem must be configured as built-in PPPoA + NAT.
Select
Obtain an IP address automatically
,
Enable NAT
, and
Add
Default Route
.
The following table describes the parameters of this page.
Field
Description
Obtain an IP address
automatically
Through PPP dial-up to obtain an IP address
assigned by up-link equipment, such as
BRAS.
Use
the
following
IP
address
If you want to manually enter the WAN IP
address, select it and enter the IP address
provided by your ISP.
Enable NAT
Select
it
to
enable
network
address
translation (NAT) function of the modem. If
you do not enable NAT and want to the
modem to access the Internet normally, you
must add a route on the uplink equipment.
Otherwise, the access to the Internet fails.
Normally, it is required to enable NAT.
Add Default Route
Add a default route in the routing table.
Normally, it must be selected. Otherwise, you
have to add a default route manually.
Step 3
Enter the correct broadband user name and password. Select a proper
PPP connection mode. Then click
Next
.
19216811.live