1. Home
    2. /
  2. Manuals
    3. /
  3. Teracom
    4. /
  4. T2-B-Gawv1 4U10Y-BI
    5. /
  5. 5
Page 21 / 131 Scroll up to view Page 16 - 20
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
18
An ISO Certificed Company
3.4.1.1
Basic Settings
By Default WiFI is disbaled in your CPE, and its using default SSID as “BSNL_AP”.
please configure the WiFI if you want to us it.
Choose
Wireless Network
>
Basic Settings
and the following page appears. You
must set the location where you are in order to prevent the modem from
transmitting the illegal frequencies.
The following table describes the parameters of this page.
Field
Description
Select Profile
Choose the security specification. You can
choose
802.11 B/G
,
802.11B only
,
802.11G
only,
or
802.11 MIXED_LONG
.
Wireless Network
Enable or disable the wireless network. If you
want to connect to the Internet, enable it.
Select Country
Choose the country where the modem works.
Channel Selection
You can choose
Auto
or
Manual
.
Select Channel
A channel is the radio frequency(ies) used by
Page 22 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
19
An ISO Certificed Company
Field
Description
802.11b/g
wireless
device.
Channels
available depend on your geographical area.
Network Name(SSID)
Service set identification (SSID) is a unique
name to identify the modem in the wireless
LAN. All wireless devices on a WLAN must
use the same SSID in order to communicate
with each other. By default, the SSID of the
modem is
BSNL_AP
.
Hide SSID
You can enable or disable this SSID.
°
If you select
Yes
, the wireless adaptor
will fail to auto-search the SSID .The
auto-searching list does not display the
SSID. However, if you know the SSID,
you can set the connection manually.
°
If you select
No
, the auto-searching list
displays the SSID.
Select Security Option
It is vital to protect wireless communication
between wireless stations, access points and
wired network. There are six options.
3.4.1.2
Advanced Settings
Click
Advanced Settings
in the
Wireless Network
page and the following page
appears. In this page, you can configure the parameters for wireless LAN clients
may connect to the modem. You can also modify the Fragmentation Threshold, Rts
Threshold, Nitroxm Piggyback and WMM.
Page 23 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
20
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
Fragmentation Threshold
The fragmentation threshold is a way of
limiting
the
size
of
packets
(frames)
transmitted over the network. If a packet
exceeds
the
configured
fragmentation
threshold,
the
fragmentation
function
is
Page 24 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
21
An ISO Certificed Company
Field
Description
enabled, and the packets are sent as multiple
802.11 frames.
RTS Threshold
Request to send (RTS) is designed to prevent
collisions due to hidden node. A RTS defines
the biggest size data frame you can send
before a RTS handshake invoked. The RTS
threshold value is between 0 and 2347.
If the RTS threshold value is greater than the
fragment
threshold
value,
the
RTS
handshake does not occur. Because the data
frames are fragmented before they reach the
RTS size.
NitroXM PiggyBack
Piggyback refers to interleaving the TCP Ack
return flow with the TCP data flow.
3.4.1.3
MAC Address Filter
Click
MAC Address Filter
in the
Wireless Network
page and the following page
appears. In this page, you can restrict the wireless PCs that connect with the
modem. You can restrict the PCs in the blacklist or whitelist way.
Select MAC Auth
: There are three options:
Disabled
,
BlackList
, or
WhiteList
.
°
If choose
Disabled
, all the PC are allowed to access the modem.
°
If choose
BlackList
, the PC whose MAC address is listed is denied to
access the modem.
Page 25 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
22
An ISO Certificed Company
°
If choose
WhiteList
, only the PC whose MAC address is listed is allowed to
access the modem.
3.4.1.4
Wireless Configuration Example
Before you configure the wireless network, ensure that the wireless network card is
installed in the PC.
The following describes the example of wireless network configuration:
Step 1
In the
Control Panel
page, double click
Network Connections
. The
following page appears.
Step 2
Right click
Wireless Network Connection
, and select
View Available
Wireless Networks
.
Step 3
In the
Wireless Network Connection
page, refresh the network lists
and select the network name (SSID)
PRISM_WIRELESS
, which is the
default SSID name. Then click
Connect
.

Rate

4.5 / 5 based on 2 votes.

Popular Teracom Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top