1. Home
    2. /
  2. Manuals
    3. /
  3. Tenda
    4. /
  4. W311R+
    5. /
  5. 8
Page 36 / 76 Scroll up to view Page 31 - 35
11N Wireless Broadband Router
31
6.3 Advanced Settings
This section is to configure the advanced wireless
setting of the Router, including the Radio Preamble,
802.11g/n Rate, Fragmentation Threshold, RTS
Threshold, etc.
¾
BG protection Mode:
Auto by default. It is for
11b/g wireless client to connect 11n wireless
network smoothly in a complicated wireless area.
¾
Basic Data Rates:
For different requirement, you
can select one of the suitable Basic Data Rates.
Here, default value is (1-2-5.5.-11Mbps…). It is
recommended not to modify this value.
¾
Beacon Interval:
Set the beacon interval of
wireless radio. Default value is 100. It is
recommended not to modify this value.
¾
Fragment
Threshold:
The
fragmentation
Page 37 / 76
11N Wireless Broadband Router
32
threshold defines the maximum transmission
packet size in bytes. The packet will be fragmented
if the arrival is bigger than the threshold setting.
The default size is 2346 bytes. It is recommended
not to modify this value.
¾
RTS Threshold:
RTS stands for “Request to Send”.
This parameter controls what size data packet the
frequency protocol issues to RTS packet. The
default value of the attribute is 2346. It is
recommended not to modify this value in SOHO
environment.
¾
TX Power:
Set the output power of wireless radio.
The default value is 100.
¾
WMM Capable:
It will enhance the data transfer
performance of multimedia data when they’re
being transferred over wireless network. It is
recommended to enable this option.
¾
APSD Capable:
It is used for auto power-saved
service. The default is disabled.
Page 38 / 76
11N Wireless Broadband Router
33
6.4 WPS Settings
WPS (Wi-Fi Protected Setting) can be easy and quick to
establish the connection between the wireless network
clients and the device through encrypted contents. The
users only enter PIN code or press WLAN/WPA button
on the panel to configure it without selecting encryption
method and secret keys by manual. In the “Wireless
settings” menu, click “WPS settings” to enter the next
screen.
¾
WPS settings
: To enable or disable WPS function.
The default is “disable”.
¾
WPS mode:
Provide two ways: PBC (Push-Button
Configuration) and PIN code.
¾
PBC:
Select the PBC or press the WLAN/WPS
button on the front panel of the device for about
Page 39 / 76
11N Wireless Broadband Router
34
one second (Press the button for about one second
and WPS indicator will be blinking for 2 minutes,
which means the WPS is enabled. During the
blinking time, you can enable another device to
implement the WPS/PBC negotiation between
them. Two minutes later, the WPS indicator will be
off, which means the WPS connection is completed.
If more clients are added, repeat the above steps.
At present, the WPS supports up to 32 clients
access.)
¾
PIN:
If this option is enabled, you need to enter a
wireless client’s PIN code in the field and keep the
same code in the WPS client.
¾
WPS Summary:
Show the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
¾
WPS Current Status:
Idle means WPS in idle
state. Start MSC process means the process has
been started and waits for being connected.
Configured means the negotiation is successful
between server and clients.
¾
WPS Configured:
“yes” means WPS feature is
enabled and goes into effect. “not used” means it is
not used. Usually the AP-security has been enabled,
here will displayed “not used”.
¾
WPS SSID:
Show the main SSID set by WPS.
¾
WPS Auth. Mode:
The authorization mode
deployed by WPS, generally WPA/WPA2-personal
mode.
Page 40 / 76
11N Wireless Broadband Router
35
¾
WPS Encrypt Type:
The encryption type used by
WPS, generally AES/TKIP.
¾
WPS key:
The effective key generated by AP
automatically.
¾
AP PIN(KEY):
The PIN code used by default.
¾
Reset OOB:
When this button is pressed, the WPS
client will be idle state, and WPS indicator will be
turned off. AP will not respond the WPS client’s
requests and the set the security mode as WPA
mode.
6.5 WDS Settings
WDS (Wireless Distribution System) is used to expand
wireless coverage area. This Router provides three
modes: Lazy, Bridge and Repeater.
Lazy:
In this mode, the connected device can be Bridge
mode or Repeater mode and enter the Router’s BSSID

Rate

4.5 / 5 based on 2 votes.

Popular Tenda Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top