Page 11 / 76
Scroll up to view Page 6 - 10
11N Wireless Broadband Router
6
Back Panel Show:
Rear Panel :( From L to R)
¾
POWER
The jack is for power adapter connection. Please
use the included 9V DC power adapter.
¾
WAN
A 100Mbps Ethernet port can be connected with
MODEM, Switch, Router and other Ethernet device
for Internet connecting to DSL MODEM, Cable
MODEM and ISP.
¾
LAN (1, 2, 3, 4)
4 10/100Mbps Ethernet ports can be connected
with Ethernet switch, Ethernet router and NIC card.
¾
RESET
The system reset button. Press this button for 7
seconds, the settings configured in this device will
be deleted and it will restore the settings to the
default one.
¾
WPS
Press it for 1 second, the WPS feature will be
enabled and WPS indicator will be shown blinking.
Page 12 / 76
11N Wireless Broadband Router
7
Chapter 2 Product Installation
2.1 Hardware Installation
After you unpack the box, please follow the steps below
to connect. For better wireless performance, please put
the device in the middle of wireless coverage area.
1. Please use the included power adapter to power on
the Router. IMPORTANT: Use of a different power
adapter could cause damage and void the warranty for
this product.
2. Please connect the LAN port of the Router to the
network adapter of your computer with a cable.
Page 13 / 76
11N Wireless Broadband Router
8
3. Please connect your broadband line provided by your
ISP to the WAN port.
4. Insert the included CD-ROM into the CD-ROM drive,
double click the “Setup” icon and follow the instructions
to complete the installation. Or you can enter the
Router’s Web page to configure it. (More details please
refer to Chapter 3.)
Page 14 / 76
11N Wireless Broadband Router
9
2.2 Network Application Plan
Usually wireless LAN Network is deployed in a planned
environment where each access point is located in a
steady place with certain wireless coverage area for
communication service. Generally speaking, it is in the
center of the area to reduce “dead spot”.
Page 15 / 76
11N Wireless Broadband Router
10
Chapter 3 How to Login to the Router
The chapter mainly presents how to enter the Router’s
Web page. After you have finished the hardware
installation, the following steps will assist you to set the
network configurations for you computer.
3.1 How to Set the Network Configurations
1. On your computer desktop right click “My Network
Places” and select “Properties”.
19216811.live