Tenda N60 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Tenda

Page 21 / 72 Scroll up to view Page 16 - 20

Concurrent Dual Band Wireless N600 Gigabit Router

Static Assignment

If you would like some devices on your network to always have fixed IP addresses,

you can use this feature and manually add a static DHCP assignment entry for each

such device.

For example: To have a PC at the MAC address of 00:15:58:c0:d4:3f always receive

the same IP address of 192.168.0.150, simply enter the IP and MAC addresses in

corresponding fields and click “Add” and then the “Save” button as shown below.

IP Address:

Enter the IP address for static DHCP assignment.

MAC Address:

Enter the MAC address of a computer to always receive the same

IP address (the IP you just entered above).

Add:

Click to add the current IP-MAC static assignment entry to the list.

Edit:

Click to change a given static assignment entry.

Delete:

Click to remove an existing entry.

4.2.4

WAN Port

“WAN Port” includes 2 submenus: MAC Clone, and Speed/Duplex. Clicking either

tab enters corresponding interface for configuration. Below explains, in details,

each such feature.

MAC Clone

This section allows you to set router’s WAN MAC address. You can either manually

enter a MAC or copy your PC’s MAC to the router.

Page 22 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

WAN MAC Address:

Displays router's current WAN MAC address, you can

manually change it.

Restore to Factory Default MAC:

Click it to restore router’s WAN MAC to factory

default value.

Clone MAC:

Click to copy your PC’s MAC to router’s WAN MAC Address field.

NOTE:

1. Normally you don't need to change the default WAN MAC value. However, some

ISP may bind client PC’s MAC address for Internet connection authentication. In this

case, simply enter such MAC in the WAN MAC Address field or click the “Clone MAC”

button. Note that the WAN MAC address in running status interface will be updated

accordingly.

2. Do remember to reboot the router to activate the new WAN MAC. DO NOT use

the “Clone MAC” feature if your ISP does not bind your PC’s MAC.

Speed/Duplex

This section allows you to config the router’s WAN port speed/duplex settings.

You can select a WAN port speed/duplex mode that best suit your network

environment from the drop-down list, which includes auto, 10M half-duplex, 10M

full-duplex, 100M half-duplex, 100M full-duplex, 1000M half-duplex and 1000M

full-duplex.

Note:

The WAN port speed/duplex mode must match that of its link partner to achieve

successful communication; otherwise, the WAN port may not function properly. So,

if you are not sure about the link partner’s speed/duplex mode, please select “Auto”.

Page 23 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

4.3

Security Settings

“Security Settings” includes the following 5 submenus. Clicking any of them

enters corresponding interface for configuration. Below explains, in details, each

such feature.

4.3.1 Group Settings

“Group Settings” includes 2 submenus: Group Settings, User Group and Time

Group. Clicking either tab enters corresponding interface for configuration. Below

explains, in details, each such feature.

User Group

To create a user group, you need to specify a group name/description and an

IP address/range. The user group feature works together with other related

features.

For example:

If you want to add a user group for a R&D department within an IP of

192.168.0.20-192.168.0.30, first click the “Add” button and then follow steps below:

Page 24 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

1. Enter R_D in group name field.

2. Enter R_D IP Range in group description field.

3. Enter “192.168.0.20” and “192.168.0.30” in IP fields.

4. Click “Add “and then the “Save “button; you will find

such entry in User Group list below:

Time Group

To create a time group, you need to specify a group name/description and a time /

time range.

For example:

If you want to set a period of time from 8

00 to 18

00 on working

days from Monday to Friday to a time group, first click the “Add” button and then

follow steps below:

Page 25 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

1. Enter “Working days” in group name field.

2. Enter “working days” in group description field.

3. Select the time and days.

4. Click “Save” and you will find such entry in Time Group list below:

4.3.2

Port Filter

To better manage PCs in LAN, you can allow or disallow such PCs to access certain

ports on Internet using the Port Filter functionality.

Click “Add” to enter page below:

Rate

Popular Tenda Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share