Page 26 / 165 Scroll up to view Page 21 - 25
Telsey
telecommunications
Web Interface
MT500--SIEN12
18
DEVICE INFO
Summary
After login, the Device Info screen appears as shown in the following figure.
WAN
The following page shows the settings currently configured in the WAN setup
(Advanced Setup section).
Page 27 / 165
Telsey telecommunications
Web Interface
19
MT500--SIEN12
Statistics LAN
The LAN Statistics screen shows interface statistics for Ethernet and USB
interfaces.
ATM Statistics
The following figure shows the ATM statistics screen.
Page 28 / 165
Telsey
telecommunications
Web Interface
MT500--SIEN12
20
Tab. 3: ATM Layer Statistics over ADSL interface
Field
Description
InOctets
Number of received octets over the interface
OutOctects
Number of transmitted octets over the interface
InErrors
Number of cells dropped due to uncorrectable HEC
errors
InUnknown
Number of received cells discarded during cell header
validation, including cells with unrecognized VPI/VCI
values, and cells with invalid cell header patterns. If
cells with undefined PTI values are discarded, they are
also counted here.
InHecErrors
Number of cells received with an ATM Cell header HEC
error.
InInvalidVpiVciErrors
Number of cells received with an unregistered VCC
address.
InPortNotEnabledErrors
Number of cells received on a port that has not been
enabled.
InPtiErrors
Number of cells received with an ATM header Payload
Type Indicator (PTI) error.
InIdleCells
Number of idle cells received.
InCircuitTypeErrors
Number of cells received with an illegal circuit type.
InOamRmCrcErrors
Number of OAM and RM cells received with CRC errors.
InGfcErrors
Number of cells received with a non-zero GFC.
Tab. 4: ATM AAL5 Layer Statistics over ADSL interface
Field
Description
InOctets
Number of received AAL5/AAL0 CPCS PDU octets.
OutOctets
Number of AAL5/AAL0 CPCS PDU octets transmitted.
InUcastPkts
Number of received AAL5/AAL0 CPCS PDUs passed to
a higher-layer.
OutUcastPkts
Number of AAL5/AAL0 CPCS PDUs received from a
higher-layer for transmission.
InErrors
Number of AAL5/AAL0 CPCS PDUs received that
contain an error. The types of errors counted include
CRC-32 errors, SAR timeout errors and oversized SDU
errors.
OutErrors
Number of AAL5/AAL0 CPCS PDUs that could not be
transmitted due to errors.
InDiscards
Number of AAL5/AAL0 CPCS PDUs discarded due to an
input buffer overflow condition.
OutDiscards
This field is not currently used.
Page 29 / 165
Telsey telecommunications
Web Interface
21
MT500--SIEN12
ADSL Statistics
The following figure shows the ADSL statistics screen.
Tab. 5: ATM AAL5 Layer Statistics for each VCC over ADSL interface
Field
Description
CrcErrors
Number of PDUs received with CRC-32 errors.
SarTimeOut
Number of partially re-assembled PDUs which were
discarded because they were not fully re-assembled
within the required time period. If the re-assembly
timer is not supported, then this object contains a zero
value.
OverSizedSDUs
Number of PDUs discarded because the corresponding
SDU was too large.
ShortPacketError
Number of PDUs discarded because the PDU length
was less than the size of the AAL5 trailer.
LengthErrors
Number of PDUs discarded because the PDU length did
not match the length in the AAL5 trailer.
Tab. 6: ADSL Statistics field
Field
Description
Mode
Modulation protocol G.DMT or T1.413
Type
Channel type, Interleave or Fast
Line Coding
Trellis coding on/off
Status
Link Status
SNR Margin (dB)
Signal to Noise Ratio (SNR) margin
Page 30 / 165
Telsey
telecommunications
Web Interface
MT500--SIEN12
22
With the ADSL Statistics
window, a Bit Error Rate
Test can be started using
the
ADSL BER Test
button.
The
windows
associated with this test
include
a
start/
configuration
window,
and in-process window
and a results window.
Select the Tested Time
(in seconds) and press
Start.
Attenuation (dB)
estimate of average loop attenuation in the
downstream direction
Output Power (dBm)
total upstream output power
Attainable rate (Kbps)
maximum achievable downstream rate
K
number of data bytes in ADSL data frame (DMT
symbol)
S
length of Reed-Solomon code word in data frames
R
number of redundant check bytes per Reed-Solomon
code word
D
interleaver depth
Super Frames
total number of super frames
Super Frames Errors
number of super frames received with errors
RS Words
total number of Reed-Solomon code words
RS Correctable Errors
number of RS words with correctable errors
RS uncorrectable Errors
number of RS words with uncorrectable errors
HEC Errors
total number of Header Error Checksum errors
LCD Errors
total number of Loss of Cell Delineation
Tab. 6: ADSL Statistics field
Field
Description

Rate

4 / 5 based on 1 vote.

Popular Telsey Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top