LTE/WiMAX DM Outdoor | User Manual

11

11

LTE/WiMAX DM Outdoor | User Manual

12

12

LED Indicators

LTE/WiMAX DM Outdoor | User Manual

13

13

Installation

Before installing the WiMAX / LTE outdoor CPE, verify that you have all the items listed in the

package checklist. If any of the items are missing or damaged, contact your service provider.

Only experienced installation professionals who are familiar with local

building and safety codes and, where applicable, are licensed by the

appropriate government regulatory authorities should install outdoor

units and antennas.

Installing WiMAX/LTE Outdoor CPE

Selecting a Location:

WiMAX / LTE Outdoor CPE should be pole-mounted outdoors and

aligned so its antenna faces the nearest LTE eNodeB / WiMAX BS. When selecting a suitable

location for the unit, consider these guidelines:

•

Place WiMAX / LTE Outdoor CPE as high as possible to achieve the best possible link

quality.

•

Place the WiMAX / LTE Outdoor CPE away from power and telephone lines.

•

Avoid placing WiMAX / LTE Outdoor CPE close to any metallic reflective surfaces.

•

Be sure to ground WiMAX / LTE Outdoor CPE with an appropriate grounding wire (not

included) by attaching it to the grounding screw on the unit and to a good ground

connection.

Mounting the ODU:

Mount WiMAX / LTE Outdoor CPE on a 1-4

”

pole using the supplied kit,

or the optional tilt accessory.

LTE/WiMAX DM Outdoor | User Manual

14

14

•

Using the clamp

1.

Thread the M10*100mm bolt through a spring washer, flat washer and the bracket holes.

2.

With the connector facing downward, attach the WiMAX / LTE Outdoor CPE to a 1-4

”

pole.

3.

Attach the bracket to the other side of the pole.

4.

Thread the M10*100mm bolts through both holes on either side, and tighten the nuts.

•

Using the tilt accessory (optional)

1.

Attach the tilt accessory to WiMAX / LTE Outdoor CPE using two pairs of flat washers, spring washers

and nuts supplied in the tilt kit.

2.

Mount the tilt accessory on a 1-4

”

pole using two 9/16

”

metal bands.

3.

Slightly release the tilt control screw, tilt LTE Outdoor CPE downward/upward as required, and

re-tighten the screw.

LTE/WiMAX DM Outdoor | User Manual

15

15

•

Connecting the Cables

CAT5 RJ45 Cable

RJ14 Cable (Telephone Line)

Connect RJ45 from ODU

Connect telephone line

from ODU