16

In the TCP/IPv6 properties window, select the Obtain an IPv6 address automatically and Obtain DNS

Server address automatically radio buttons. Then click OK to exit the setting.

Click OK again in the Local Area Connection Properties window to apply the new configuration.

Factory Default Settings

Before configuring your router, you need to settings.

Web Interface (Username and Password)

Three user levels are provided by this router, namely Administrator, Remote and Local respectively.

See Access Control .

Administrator

Username: admin Password: admin

Attention

If you have forgotten the username and/or password of the router, you can restore the device to its

default setting by pressing the Reset Button more than 5 seconds.

Device LAN IPv4 settings

-

IPv4 Address: 192.168.0.254

-

Subnet Mask: 255.255.255.0

Device LAN IPv6 settings

-

IPv6 Address / prefix: Default is a link-local address and is different from each other as MAC

address is different from one to one

-

17

DHCP server for IPv4

-

DHCP server is enabled

-

Start IP Address: 192.168.0.100

-

IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory.

The default values are shown in the

table.

IPv4

LAN Port

WAN Port

IPv4 address

192.168.0.254

The RFC1483 Bridged IP LLC

function is enabled to

automatically get the WAN IP

address from the ISP

Subnet Mask

255.255.255.0

DHCP server function

Enabled ports 1-3

IP addresses for

distribution to PCs

100 IP addresses continuing from

192.168.0.100 through

192.168.0.199

IPv6

LAN Port

WAN Port

IPv6 address/prefix

Default is a link-local address and is

different from each other as MAC

address is different from one to one.

The RFC1483 Bridged IP LLC

function is enabled to

automatically get the WAN IP

address from the ISP

DHCP server function

Enabled

18

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out

what kind of service is provided.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE(RFC2516)

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,

and Domain Name System (DNS) IP address (it can be automatically

assigned by your ISP when you connect or be set manually).

PPPoA(RFC2364)

VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain

Name System (DNS) IP address (it can be automatically assigned by your

ISP when you connect or be set manually).

DHCP Client

VPI/VCI, VC / LLC-based multiplexing, Domain Name System (DNS) IP

address (it can be automatically assigned by your ISP when you connect or

be set manually).

IPoA(RFC1577)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

Pure Bridge

VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

19

Chapter 3: Configuration

Configuration via Web Interface

Open your web browser; enter the IP address of your router, which by default is 192.168.0.254, and

click ok or press ‘Enter’ key on the keyboard, a login prompt window will appear. The default root

username and password are “admin” and “admin” respectively.

Congratulations! You are now successfully logged in to the Firewall Router!

Once you have logged on to your TeleWell TW-EAV510v2 Router via your web browser, you can

begin to set it up according to your requirements. On the configuration homepage, the left navigation

pane links you directly to the setup pages, which include:

Status

(Summary, WAN, Statistics, Bandwidth Usage, 3G/LTE Status, Route, ARP, DHCP, VPN and

Log)

Quick Start

(Quick Start)

Configuration

(LAN, Wireless, WAN, System, USB, IP Tunnel, Security, Quality of Service, NAT,

Wake On LAN)

VPN

(IPSec, VPN Account, PPTP, L2TP, GRE)

Advanced Setup

(Routing, DNS, Static ARP, UPnP, Certificate, Multicast, Management, Diagnostics)

20

Status

This Section gives users an easy access to the information about the working router and access to

view the current status of the router. Here Summary, WAN, Statistics, Bandwidth Usage, 3G/LTE

Status, Route, ARP, DHCP, VPN and Log subsections are included.

Summary

The basic information about the device is provided here (the following is a configured screenshots to

let users understand clearly).