41

If you clicked the

Tone Selection

button, the ADSL Tone Settings window opens

Note:

The ADSL tone settings should only be configured with the assistance of your ISP.

UPNP

To access the

UPnP Configuration

window, click the

UPnP

button in the

Advanced Setup

directory.

This window allows you to Config UPnP Proxy. Click the

Apply /

Save

button when you are

finished.

DNS Proxy

To access the

DNS Proxy Configuration

window, click the

DNS Proxy

button in the

Advanced Setup

directory.

This window allows you to Config DNS Proxy. Click the

Apply /

Save

button when you are

finished.

42

DLNA

Select

DLNA

from the

Advanced Setup

menu to open the DLNA window. This window allows

you to config DLNA function. Click the

Apply /

Save

button when you are finished.

Storage service

The Storage Service window displays Storage Device information from USB interface.

Select

Storage Service

from the

Advanced Setup

menu to open the Storage Service window

43

Interface Grouping

Interface Group supports multiple ports to PVC and bridging groups. Each group will perform

as an independent network.

To support this feature, you must create mapping groups with appropriate LAN and WAN

interfaces using the Add button. The Remove button will remove the grouping and add the

ungrouped interfaces to the Default group. Only the default group has IP interface.

Click

Add

to do advanced settings.

To create a new mapping group, enter

Group Name

, add interfaces to

Grouped Interfaces

.

Click

Apply / Save

to save the changes.

44

IP Tunnel

Select

IP Tunnel

from the

Advanced Setup

menu to open the IP Tunnel submenu.

IPv6inIPv4

Select

IPv6inIPv4

from the

IP Tunnel

submenu to open the IP Tunneling-6in4 Tunnel

Configuration window

If you click

Add

, the detail of the IP Tunneling-6in4 Tunnel Configuration window will open

IPv4inIPv6

Select

IPv4inIPv6

from the

IP Tunnel

submenu to open the IP Tunneling-4in6 Tunnel

Configuration window;

If you click

Add

, the detail of the IP Tunneling-4in6 Tunnel Configuration window will open

45

IPSec

To access the

IPSec Tunnel Mode Connections

window, click the

IPSec

button in the

Advanced Setup

directory.

This window allows you to configure

IPSec

.

Click

Add New Connection

to edit IPSec tunnel mode connections from this page

This window allows you to advanced settings.