26

Security

To access the

Security

window, click the

Security

button in the

Advanced Setup

directory.

The

Security

button appears after configuring WAN interface in PPPoA, PPPoE, IPoE or IPoA.

IP Filtering

The

IP Filtering

button appears when configuring WAN interface in PPPoA, PPPoE, IPoE or

IPoA.

IP Filtering - Outgoing

This window allows you to create a filter rule of

Outgoing

.

Click

change default policy

to change the mode of policy.

Now default policy is

BLOCK

, it means all outgoing IP traffic from LAN is blocked, but some IP

traffic can be accepted by setting up filters.

If you are setting up the outgoing IP filtering, click the

Add

button.

27

Now default policy is ACCEPT, it means all outgoing IP traffic from LAN is allowed, but some

IP traffic can be blocked by setting up filters.

If you are setting up the outgoing IP filtering, click the

Add

button.

Enter the information in the section. Explanations of parameters are described below. Click the

Apply / Save

button to add the entry in the Active Outbound IP Filtering table.

IP Filtering – Incoming

This window allows you to create a filter rule of

Incoming

.

Click

change default policy

to change the mode of policy.

Now default policy is

ACCEPT

, it means all incoming IP traffic from WAN is accepted, but

some IP traffic can be blocked by setting up filters.

If you are setting up the incoming IP filtering, click the

Add

button.

Now default policy is

BLOCK

, it means all incoming IP traffic from WAN is blocked, but some

IP traffic can be accepted by setting up filters.

If you are setting up the incoming IP filtering, click the

Add

button.

28

Enter the information in the section. Explanations of parameters are described below. Click the

Apply / Save

button to add the entry in the Active Inbound IP Filtering table.

MAC filter

The MAC Filtering window enables you to control access to and from specific MAC addresses.

Select

MAC Filtering

from the

Security

submenu to open the MAC Filtering Setup window;

If you have selected to

Add

a MAC filter, the Add MAC Filter window opens

29

Parental Control

Use this window to deny access to specified MAC address.

Time Restriction

If you are setting up the MAC address blocking, click the

Add

button.

MAC address is a specially formatted text string (xx:xx:xx:xx:xx:xx) that uniquely identification

of a device. This section will allow users to block devices with certain MAC addresses on the

LAN.

To configure for MAC address blocking, enter the username into the

Username

field, click

Browser’s MAC Address

to have MAC address of the LAN device, or click

Other MAC

Address

and enter a MAC address manually. Tick the checkboxes for the desired individual

days of the week and enter desired

Start Blocking Time

and

End Blocking Time

.

Click the

Save/Apply

button to save the configuration

30

URL Filter

This window allows you to set up

URL

Filter

on the Router.

Choose URL List Type

Exclude

or

Include

first and click

Add

button.

Enter the URL address and port number then click

Apply / Save

to add the entry to the URL

filter.