Page 21 / 95 Scroll up to view Page 16 - 20
19
Chapter 4
Configuration
Once you have logged on to your ADSL Router via your web browser, you can begin to set it
up according to your requirements. On the configuration homepage, the left navigation pane
links you directly to the setup pages, which include:
Status
(ARP Table, Wireless Association, Routing Table, DHCP Table, System Log,
Security Log)
Quick Start
Configuration
(LAN, WAN, System, Firewall, QoS, Virtual Server and Advanced)
Save Config to FLASH
The following sections provide an overview of the settings available for configuring your
TW-EA 510 v3 router.
Page 22 / 95
20
4.1 Status
Page 23 / 95
21
Device Information
Host Name:
Provide a name for the router for identification purposes. Host Name lets
you change the router name.
System Up-Time:
Records system up-time.
Current time:
Set the current time. See the Time Zone section for more information.
Hardware Version:
Chipset version
Software Version:
Firmware version
Page 24 / 95
22
LAN MAC Address:
The LAN MAC address
WAN MAC Address:
The WAN MAC address
Home URL:
Connects to the Home Website.
LAN
IP Address:
LAN port IP address.
Sub Net Mask:
LAN port IP subnet mask.
DHCP Server:
LAN port DHCP role - Server, Relay or None.
WAN
IP WAN:
Name of the WAN connection.
VPI/VCI:
Virtual Path Identifier and Virtual Channel Identifier
Connection:
Selects “Disconnected” or “Connected”
IP Address:
WAN port IP address.
Net mask:
WAN port IP subnet mask.
Gateway:
The IP address of the default gateway.
Port Status
User can look up for your connected condition
Page 25 / 95
23
4.1.1 ARP Table
The router’s ARP (Address Resolution Protocol) Table shows the mapping of Internet (IP)
addresses to Ethernet (MAC) addresses. This is a quick way to determine the MAC address
of the network interface of your PCs to use with the router’s
Firewall – MAC Address Filter
function. See the Firewall section of this manual for more information.
IP Address:
A list of IP addresses of devices on your LAN (Local Area Network).
MAC Address:
MAC (Media Access Control) address for each device on your LAN.
Interface:
The interface name (on the router) that this IP Address connects to.
Static:
Static status of the ARP table entry:
no
” for dynamically-generated ARP table entries
yes
” for static ARP table entries added by the user

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top