Page

26

/

84

4.

Connection/Downstream

This page reports current CM

’

s downstream information containing Receiver #, Channel ID, Lock Status,

Frequency, Modulation, Symbol Rate, SNR and Power. The information can be useful to your cable

company’s support technician if you’re having problems.

By entering frequency in KHz and clicking

“

Force frequency

”

button, you can force the CM locking to the specified frequency.

Fig. 2-8 Status\Connection\Downstream

Page

27

/

84

5.

MTA/Status

This page displays the initialization status of the MTA containing Telephony DHCP, Security, TFTP, Call

Server and Provisioning Status

. The information can be useful to your cable company’s support

technician if you’re having problems.

The MAC List state can be found at the bottom of this page. It reports the current state of Line1 and

Line2.

Fig. 2-9 Status\MTA\Status

Page

28

/

84

6.

Diagnostics/Ping

This page can be used for determining the quality of your network connection. By setting up the

Destination IP address, Packet size, Packet count and then clicking

“

Start

”

button, you can check and

determine the quality of network connection. The result of Ping will be displayed at the frame under

Packet count. You can click the

“

Abort

”

button at any time during Ping test to abort the test. The

information can be useful to your cable company’s support technician if you’re having problems.

Fig. 2-10 Status\Diagnostics\Ping

Page

29

/

84

7.

Diagnostics/Trace Route

With this page you can perform trace route to display the route (path) and measure transit delays of

packets. In order to do trace route, a host IP and maximum TTL must be entered prior to start. Host IP is

the destination that you plan to trace route to. The value of MAX TTL ranges from 1 to 30 seconds.

Result of trace route will be displayed in ping text frame. You can click the

“

Abort

”

button at any time

during trace route test to abort the test.

The information can be useful to your cable company’s support

technician if you’re having problems.

Fig. 2-11 Status\Diagnostics\Trace Route

Page

30

/

84

Basic

–

Basic Web Page Group

1.

Internet

This page shows you the basic configuration of broadband gateway related to your MSO

’

s connection. It

allows configuration of Host Name and Domain Name if needed.

Clicking

“

WAN IP Renew

”

button will force the modem renewing WAN IP immediately.

Fig.2-12 Basic\Internet