11

•

Select [Internet Protocol (TCP/IP)] =>Click [Properties].

•

Select the [General] tab.

a. WL-303/WL-312 supports [DHCP] function, please select both [Obtain

an IP address automatically] and [Obtain DNS server address

automatically].

12

8 Bring up WL-303/WL-312

Connect the supplied power-adapter to the power inlet port and connect it to

a wall outlet. TheWL-303/WL-312 automatically enters the self-test phase.

During self-test phase, the Power LED will blink briefly, and then will be lit

continuously to indicate that this product is in normal operation.

9

Initial Setup WL-303/WL-312

LOGIN procedure

2.

Click OPEN your browser (e.g. Internet Explorer).

3. Type

in address bar and press [Enter]

13

4.

Type user name and password (default is admin/admin).

5. Click

OK

.

6.

You will see the home page of the WL-303/WL-312.

The System status section allows you to monitor the current status of your router

the UP time, hardware information, serial number as well as firmware version

information is displayed here.

14

LAN settings

The LAN tabs gives you the opertunity to change the IP settings of the WL-

303/312.

Click

<Apply>

at the bottom of this screen to save any changes.

IP address

192.168.0.1. It is the router’s LAN IP address (Your LAN clients default

gateway IP address).

IP Subnet Mask

255.255.255.0 Specify a Subnet Mask for your LAN segment.

802.1d Spanning Tree

is Disabled by default. If the 802.1d Spanning Tree

function is enabled, this router will use the spanning tree protocol to prevent

network loops.

DHCP Server

Enabled by default. You can enable or disable the DHCP server.

When DHCP is disabled no ip-addresses are assigned to clients and you have to

use static ip-addresses. When DHCP server is enabled your computers will be

assigned an ip-address automatically until the lease time expires.

Lease Time

Forever. In the Lease Time setting you can specify the time period

that the DHCP lends an IP address to your LAN clients. The DHCP will change

your LAN client’s IP address when this time threshold period is reached.

15

IP Address Pool

You can select a particular IP address range for your DHCP

server to issue IP addresses to your LAN Clients.

Note

:

default IP range 192.168.0.100

192.168.0.199. If you want your PC(s) to have a

static/fixed IP address, then you’ll have to choose an IP address outside this IP address Pool

Domain Name

You can specify a Domain Name for your LAN. Or just keep the

default (sitecom_router).