6
SAGEM F@st
TM
1704
4.
Installation from the
CD-ROM
1.
Insert the CD-ROM into the relevant drive of your
computer.
2.
The welcome screen appears. Click on
Next
.
3.
Read carefully the precautions to be taken
during the installation then click on
Next
.
4.
Select the type of installation you want to
perform then click on
Next
. For a first-time
installation, select
"You want to install your
router modem for the first time"
.
5.
Select the interface you want to use to connect
your router to your computer: Wi-Fi or Ethernet.
Depending on the interface you select, refer to
the relevant section to proceed with the
installation:
•
Installation by Wi-Fi interface
, page 6
•
Installation of the Ethernet port
, page 8
Installation by Wi-Fi interface
1.
You selected the
Wireless
interface (Wi-Fi), click
on
Next
.
2.
Select the wireless connection mode (Wi-Fi).
The following connection modes are available:
•
by installing a Wi-Fi USB adapter (or key) on
your computer,
•
or by using your computer’s built-in Wi-Fi.
USB Wi-Fi adapter
1.
You selected
Wi-Fi USB adapter
, click on
Next
.
2.
Follow the instructions displayed onscreen
by connecting the USB Wi-Fi adapter to your
computer, then configure the Wi-Fi interface.
The following Wi-Fi parameters must be
entered:
•
SSID,
•
Security key.
Important
Make sure that the router is not
connected to your computer before
you start the installation from the CD-
ROM.
Note
The installation procedure described
below was undertaken in Windows
Vista
TM
. Installation in other Windows
®
(98, ME, 2000 and XP) can be slightly
different.
Important
Whichever mode you select, you must
plug in the router and connect it to the
ADSL line.
19216811.live