300M Wireless N Router

RNX-N300RT

User Manual

5.

Click

Next

to continue, the Wireless settings page will appear as shown in Figure 3-9.

Figure 3-9

Quick Setup – Wireless

¾

Wireless Radio -

Enable or disable the wireless radio choosing from the

pull-down list.

¾

SSID -

Enter a value of up to 32 characters. The same name of SSID (Service

Set Identification) must be assigned to all wireless devices in your network.

Considering your wireless network security, the default SSID is set to be

rosewill_XXXXXX (XXXXXX indicates the last unique six numbers of each

Router’s MAC address). This value is case-sensitive. For example,

TEST

is

NOT the same as

test

.

¾

Region

-

Select your region from the pull-down list. This field specifies the

region where the wireless function of the Router can be used. It may be illegal to

use the wireless function of the Router in a region other than one of those

specified in this field. If your country or region is not listed, please contact your

local government agency for assistance.

¾

Channel -

This field determines which operating frequency will be used. The

default channel is set to Auto. So the AP will choose the best channel

-25-

300M Wireless N Router

RNX-N300RT

User Manual

automatically. It is not necessary to change the wireless channel unless you

notice interference problems with another nearby access point.

¾

Mode -

This field determines the wireless mode which the Router works on.

¾

Channel Width -

Select any channel width from the pull-down list. The default

setting is automatic, which can adjust the channel width for your clients

automatically.

¾

Max Tx Rate -

You can limit the maximum transmission rate of the Router

through this field.

¾

Disable Security -

The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the Router without

encryption. It is strongly recommended that you choose one of following options

to enable security.

¾

WPA-PSK/WPA2-PSK -

Select WPA based on pre-shared passphrase.

z

PSK Password

- You can enter

ASCII

or

Hexadecimal

characters.

For

ASCII

, the key can be made up of any numbers 0 to 9 and any letters A

to Z, the length should be between 8 and 63 characters.

For

Hexadecimal

, the key can be made up of any numbers 0 to 9 and

letters A to F, the length should be between 8 and 64 characters.

Please also note the key is case sensitive, this means that upper and lower

case keys will affect the outcome. It would also be a good idea to write down

the key and all related wireless security settings.

¾

No Change -

If you chose this option, wireless security configuration will not

change!

These settings are only for basic wireless parameters. For advanced settings, please

refer to

Section 4.6: “Wireless”.

6.

Click the

Next

button. You will then see the

Finish

page.

If you don’t make any changes on the

Wireless

page, you will see the

Finish

page as

shown in Figure 3-10. Click the

Finish

button to finish the

Quick Setup

.

-26-

300M Wireless N Router

RNX-N300RT

User Manual

Figure 3-10

Quick Setup - Finish

If there are something changed on the

Wireless

page, you will see the

Finish

page

as shown in Figure 3-11. Click the

Reboot

button to make your wireless configuration

to take effect and finish the

Quick Setup

.

Figure 3-11

Quick Setup - Finish

-27-

300M Wireless N Router

RNX-N300RT

User Manual

Chapter 4 Configuring the Router

This chapter will show each Web page's key functions and the configuration way.

4.1 Functions Page

After your successful login, you will see the fourteen main functions on the left of the

Web-based utility. On the right side, there will the corresponding Setup options and

explanations instructions.

Figure 4-1 the main menu

The detailed explanations for each Web page’s key function are listed below.

4.2 Status Details

The Status page provides the current status information about the Router. All information

is read-only.

-28-

300M Wireless N Router

RNX-N300RT

User Manual

Figure 4-2

Router Status

4.3 Quick Setup

Please refer to

Section 3.2: "Quick Installation Guide."

-29-