Wireless Router

RNX-GX4

User’s Manual

26

3.4.1 DHCP user (for Cable modem) in Internet Setup

When selecting “

DHCP user (Cable Modem)

” as your internet connection

method, please enter the DNS server address as the Primary DNS and

Secondary DNS provided by your Internet Service Provider. You may also be

required to enter the MAC address in some cases depending if your ISP requires.

When complete entering, please click “

Save Settings

” to save and complete

your basic setup.

3.4.2 PPPoE user (for DSL modem) in Internet Setup

When selecting “

PPPoE user (ADSL)

” as your internet connection method,

please enter your PPPoE Username and PPPoE Password provided by your

Internet Service Provider. You may also be required to enter the MAC address,

Primary DNS, and Secondary DNS in some cases depending if your ISP

requirements. You can also select three connection methods as you desired:

h

Connect to Internet automatically (Default)

h

Auto disconnect when idle within your desired time limits

h

Connect to Internet manually

Wireless Router

RNX-GX4

User’s Manual

27

When complete entering, please click “

Save Settings

” to save and complete

your basic setup.

3.4.3 Static user in Internet Setup

When selecting “

Static user

” as your internet connection method, you will need

to enter WAN IP address, Subnet Mask, Default Gateway, Primary DNS, and

Secondary DNS provided by your Internet Service Provider.

PPPoE provides three connection methods:

Connect to Internet automatically (Default)

: This is suitable for DSL connecting method charged

by month; once the Router’s power-on, your internet connection will be establish automatically.

Auto disconnect when idle within your desired time limits

: This is suitable for DSL connecting

method charged by the time you connect online. Your router will not be connect automatically,

however, once your Router detect you are visiting the internet, it will automatically connect your

service and it will automatically disconnect internet with the time you set (5~30 minutes), if no

internet visiting.

Connect to Internet manually

: This is suggested to be use by Network Administrator to provide

internet when needed. Router will not connect internet automatically but manually connect thought

visiting the web management page.

Wireless Router

RNX-GX4

User’s Manual

28

3.5 Wireless Management

“

Wireless Management

” includes Wireless Network setup and Dual-AP Wireless

Clients setup; please follow a step by step guide to setup your Router.

Clone MAC address

: Normally this doesn’t require being set. However for some modems, such as

cable modem, DSL modem, or ISP’s system will recorded the MAC address of the original adapter

which causes internet unusable. So Cloning original adapter’s MAC address will help to solve this

issue.

MTU

（

Maximum Transfer Units

）

: This is to set the transfer size of the packet. The suggested range

is from 1200~1500. For most DSL user, please select to use 1492.

Wireless Router

RNX-GX4

User’s Manual

29

3.5.1 Primary AP Setup

3.5.1.1

Router’s Wireless Basic Setup

First please use Cable connection connected to the Wireless Router’s LAN port.

After established the connection and login into the web management page,

please select “

Primary AP Setup

” option under “

Wireless Management

”.

Then you should see the same as below diagram. (The default “W

ireless

Network Status

” is “

Enable

”.) You can also select to start the “

Secondary AP

Setup

” which defaults as Disable.

You will need to assign the below wireless options:

h

Wireless Network Status:

You can choose “enable” or “disable” to enable or disable the “Wireless

Network Status”, if what you choose is “Disable”, the AP function of

wireless router will be turned off.

h

Radio Band:

You can select the wireless standards running on your network, if you

have Wireless-G, and Wireless-B devices in your network, keep the

default setting, 802.11b/g Mixed.

h

SSID:

This is the broadcasting name for your wireless connection. You can

change SSID to the name you desire. Your PC/NB will need to connect

to the same SSID that your Wireless Router uses. The Default SSID is

“

ROSEWILL

”.

h

SSID Broadcasting:

Dual-AP Function: We provide Dual-AP function for you to setup two SSID as two wireless networks

for the ease of control on your network management. You can set both Primary AP and Secondary

AP as different Network. The settings for Dual-AP are fundamentally the same.

Wireless Router

RNX-GX4

User’s Manual

30

You can select whether to broadcast your SSID. The default setting is

“

Enable

”.

z

Enable:

All Wireless Adapter will be able to see your SSID within

your Wireless Router’s broadcasting range.

z

Disable:

You will need to manually setup the connection between

your wireless adapter and SSID.

h

Channel:

You can select one channel from auto or manually from 1 to 11, which

provides a choice of avoiding interference.

After complete, please click “

Save Setting

”. Your Basic Wireless setting will

be complete.

3.5.1.2

Router’s Wireless Security Setup

Please select “

Primary AP Setup

” under “

Wireless Management

”, then click

select “

Security

” tab. This “

Security

” Tab allows you to encrypt your wireless

communication also to protect your wireless network from unauthorized user

access.

Security Mode provides you with five encryption selections, “None”, “WEP”,

“WPA SOHO USER”, “WPA2 SOHO USER” and “WPA & WPA2 SOHO USER”.

h

None:

When selecting “

None

”, you choose not to set any encryption on your

wireless network. Your wireless network will not be protected. You can

use this selection when setting for a public wireless network.

Wireless Network Security:

Upon completing the basic wireless network setting. Please do

remember to change the default security setting from “None” to the Security mode that you desire

to prevent your wireless network from unauthorized access.