6

Wall-mount option

Before attach this router on the wall, you have to finish the desktop option steps first.

1. Select a location with access for cables and a power outlet.

2. Unplug the unit. Place it upside down on a flat surface and mark the two holes for

anchors.

3. Installing the Wall mount anchor (plastic) into the wall with tools such as drill or

hammer.

4. Insert the provided screws in each hole of the stand parts.

5. Attaches the unit to the anchors on the wall.

Stand Option

1. The Router includes two stand parts.

2. Combine two parts into one stand. Combine it with the side of router near the power

port. Push the stand up to snap it into place.

3. Place the Router.

Restore Default Button

1.

Push the button for more than 5 seconds and then release it, the

system will return to factory default setting. In the meantime, system

rewrites flash to default value and Status LED halts for a while.

Approximately 60 seconds later, the Status LED blinks green

periodically, now the whole system parameters have returned to

factory default value. If the process has been interrupted by any

reason (power off…), the system will fail. Before performing the

process, ensure a safe operating environment please

！

2.

To reboot the Router, Press the button for 2-5 seconds and then

release it, and all the setting won’t be erased. Wait for the Router to

complete the reboot, and then you can start to use it.

Warning

：

Incomplete factory setting recovery procedure will cause the

Wireless Router malfunction

！

If you are unfortunately in this

situation, do not try to repair it by yourself. Consult your local

distributor for help

！

7

Installing And Using Wireless Router

This Chapter provides a step-by-step guide to the installation and configuration

of the Wireless Router. We suggest you go over the whole chapter and then do

more advanced operation.

Network configuration setup

Steps to build up the network:

¾

Connect the ADSL or Cable modem to the Ethernet WAN port on the back of

the Wireless Router by using the UTP cable.

¾

Connect the phone line from the wall socket to the line-in port on the ADSL

modem, or the coaxial cable to the line-in port on the Cable modem.

¾

Plug-in the power adapter to the modem and turn on the power. Install the

Ethernet card into the computer by referring to the User Guide that came with

the card.

¾

Connect the computer to the Wireless Router by using standard twisted-pair

Ethernet cable from the computer’s Ethernet card to an 10/100Mbps Ethernet

port on the back of the Wireless Router.

¾

Plug-in the power adapter to the Router and the other side to the wall outlet.

8

Computer configuration setup

In order to communicate with this Wireless Router, you have to configure the IP

addresses of your computer to be compatible with the device. The router supports

DHCP server and it is enabled as default. Users that configure your IP address as

“Obtain an IP address automatically”

may skip the following IP configuration

instruction.

Note:

1.

The default network setting of the device:

IP address:

192.168.1.1

Subnet Mask:

255.255.255.0

DHCP Server:

enabled

2.

In the following TCP/IP configuration guide, the IP address “192.168.1.2 ” is

assumed to be your IP address if you want to specify IP addresses manually.

Please

DO NOT

choose 192.168.1.1 for the IP address (192.168.1.1) has been

set as the default IP for this device.

3.

The following TCP/IP configuration guide uses windows XP as the presumed

operation system.

Procedures to configure IP addresses for your computer

1.

If you are in Classic Start menu view, click

Start

Æ

Settings

Æ

Control

Panel

Æ

Network Connections

.

If you are in Start menu view, click

Start

Æ

Control Panel

Æ

Network Connections.

2.

Double click “

Local Area Connection

”

9

3.

C

hoose

Internet Protocol (TCP/IP)

and click

Properties.

4.

You may choose “Obtain an IP address automatically”(recommend) to get IP address

automatically or choose “Use the following IP address” to specify IP addresses manually.

Please click the OK button after your configuration.

10

Management

Wireless Router configuration setup

In order to make the whole network operate successfully, it is necessary to

configure the Wireless Router through your computer has a WEB browser

installed. Please follow up the steps listed below.

1. Double click the Internet WEB browser icon on your desktop screen

(Netscape Communicator 4.0 and Internet Explorer 3.0 or update version)

2. Type 192.168.1.1 into the URL WEB address location and press Enter.

3. The Username and Password Required window appears.

-

Enter

admin

in the User Name location (default value).

-

Enter

admin

in the Password location (default value).

-

Click

“OK”

button