1. Home
    2. /
  2. Manuals
    3. /
  3. RadioLabs
    4. /
  4. O2Storm
    5. /
  5. 6
Page 26 / 77 Scroll up to view Page 21 - 25
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
18
Screen snapshot – Wireless Advanced Settings
Item
Description
Authentication Type
Click to select the authentication type in
Open System
,
Shared Key
or
Auto
selection.
Fragment Threshold
Set the data packet fragmentation threshold, value can be
written between 256 and 2346 bytes.
Refer to 4.10 What is Fragment Threshold?
RTS Threshold
Set the RTS Threshold, value can be written between 0
and 2347 bytes.
Refer to 4.11 What is RTS(Request To Send) Threshold?
Beacon Interval
Set the Beacon Interval, value can be written between 20
and 1024 ms.
Refer to 4.12 What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Preamble Type
Click to select the
Long Preamble
or
Short Preamble
Page 27 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
19
support on the wireless data packet transmission.
Refer to 4.13 What is Preamble Type?
Broadcast SSID
Click to enable or disable the SSID broadcast function.
Refer to 4.14 What is SSID Broadcast?
IAPP
Click to enable or disable the IAPP function.
Refer to 4.20 What is Inter-Access Point Protocol(IAPP)?
802.11g Protection
Protect 802.11b user.
RF Output Power
To adjust transmission power level.
Turbo Mode
Click to Enable/Disable turbo mode.(
Only apply to
WLAN IC of Realtek
).
Block Relay Between
Clients
Click Enabled/Disabled to decide if blocking relay
packets between clients.
WMM
Click Enabled/Disable
d
to init WMM feature.
ACK Timeout
Set ACK timeout value. It shows current time in the end.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
3.3.6
Wireless - Security Setup
This page allows you setup the wireless security. Turn on WEP, WPA, WPA2 by
using encryption keys could prevent any unauthorized access to your wireless
network.
Screen snapshot – Wireless Security Setup
Page 28 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
20
Item
Description
Encryption
Select the encryption supported over wireless access. The
encryption method can be None, WEP, WPA(TKIP),
WPA2 or WPA2 Mixed
Refer to 4.9 What is WEP?
4.15 What is Wi-Fi Protected Access (WPA)?
4.16 What is WPA2(AES)?
4.17 What is 802.1X Authentication?
4.18 What is Temporal Key Integrity Protocol (TKIP)?
4.19 What is Advanced Encryption Standard (AES)?
Use 802.1x
Authentication
While Encryption is selected to be WEP.
Click the check box to enable IEEE 802.1x
authentication function.
Refer to 4.16 What is 802.1x Authentication?
WPA Authentication
Mode
While Encryption is selected to be WPA.
Click to select the WPA Authentication Mode with
Enterprise (RADIUS) or Personal (Pre-Shared Key).
Refer to 4.15 What is Wi-Fi Protected Access (WPA)?
Pre-Shared Key Format
While Encryption is selected to be WPA.
Select the Pre-shared key format from the pull-down
menu. The format can be Passphrase or Hex (64
characters).
[WPA, Personal(Pre-Shared Key) only]
Pre-Shared Key
Fill in the key value. [WPA, Personal(Pre-Shared Key)
only]
Enable
Pre-Authentication
Click to enable Pre-Authentication. [WPA2/WPA2
Mixed only, Enterprise only]
Authentication
RADIUS Server
Set the IP address, port and login password information
of authentication RADIUS sever.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Page 29 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
21
I
WEP Key Setup
Screen snapshot – WEP Key Setup
Item
Description
Key Length
Select the WEP shared secret key length from pull-down
menu. The length can be chose between 64-bit and
128-bit (known as “WEP2”) keys.
The WEP key is composed of initialization vector (24
bits) and secret key (40-bit or 104-bit).
Key Format
Select the WEP shared secret key format from pull-down
menu. The format can be chose between plant text
(ASCII) and hexadecimal (HEX) code.
Default Tx Key
Set the default secret key for WEP security function.
Value can be chose between 1 and 4.
Encryption Key 1
Secret key 1 of WEP security encryption function.
Encryption Key 2
Secret key 2 of WEP security encryption function.
Encryption Key 3
Secret key 3 of WEP security encryption function.
Encryption Key 4
Secret key 4 of WEP security encryption function.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Close
Click to close this WEP Key setup window.
Reset
Click the
Reset
button to abort change and recover the
Page 30 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
22
previous configuration setting.
WEP encryption key (secret key) length:
Length
Format
64-bit
128-bit
ASCII
5 characters
13 characters
HEX
10 hexadecimal codes
26 hexadecimal codes
3.3.7
Wireless - Access Control
If you enable wireless access control, only those clients whose wireless MAC
addresses are in the access control list will be able to connect to your Access
Point. When this option is enabled, no wireless clients will be able to connect if
the list contains no entries.
Screen snapshot – Wireless Access Control
Item
Description
Wireless Access
Control Mode
Click the
Disabled
,
Allow Listed
or
Deny Listed
of drop
down menu choose wireless access control mode.
This is a security control function; only those clients
registered in the access control list can link to this
WLAN Broadband Router.
MAC Address
Fill in the MAC address of client to register this WLAN

Rate

3.5 / 5 based on 2 votes.

Popular RadioLabs Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top