1. Home
    2. /
  2. Manuals
    3. /
  3. RadioLabs
    4. /
  4. O2Storm
    5. /
  5. 4
Page 16 / 77 Scroll up to view Page 11 - 15
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
8
3
Software configuration
There are web based management and configuration functions allowing you to have the jobs
done easily.
The WLAN Broadband Router is delivered with the following factory default parameters on
the Ethernet LAN interfaces.
Default IP Address
:
192.168.1.254
Default IP subnet mask
:
255.255.255.0
WEB login User Name
:
<empty>
WEB login Password
:
<empty>
3.1
Prepare your PC to configure the WLAN Broadband Router
For OS of Microsoft Windows 95/ 98/ Me:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
Note:
Windows Me users may not see the Network control panel. If so,
select
View
all Control Panel options
on the left side of the window
2.
Move mouse and double-click the right button on
Network
icon. The
Network
window will appear.
3.
Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK and reboot your PC after completes the IP parameters setting.
For OS of Microsoft Windows 2000, XP:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Page 17 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
9
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network and Dial-up Connections
icon. Move mouse and double-click the
Local Area Connection
icon. The
Local Area
Connection
window will appear. Click
Properties
button in the
Local Area
Connection
window.
3.
Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK to completes the IP parameters setting.
For OS of Microsoft Windows NT:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network
icon. The
Network
window will appear. Click
Protocol
tab from the
Network
window.
3.
Check the installed list of
Network Protocol
window. If TCP/IP is not installed, click
the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK to complete the IP parameters setting.
Page 18 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
10
3.2
Connect to the WLAN Broadband Router
Open a WEB browser, i.e. Microsoft Internet Explore, then enter 192.168.1.254 on the
URL to connect the WLAN Broadband Router.
3.3
Management and configuration on the WLAN Broadband Router
3.3.1
Status
This page shows the current status and some basic settings of the device, includes
system, wireless, Ethernet LAN and WAN configuration information.
Screen snapshot – Status
Item
Description
System
Uptime
It shows the duration since WLAN Broadband Router is
powered on.
Firmware version
It shows the firmware version of WLAN Broadband
Page 19 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
11
Router.
Wireless configuration
Mode
It shows wireless operation mode
Band
It shows the current wireless operating frequency.
SSID
It shows the SSID of this WLAN Broadband Router.
The SSID is the unique name of WLAN Broadband
Router and shared among its service area, so all devices
attempts to join the same wireless network can identify it.
Channel Number
It shows the wireless channel connected currently.
Encryption
It shows the status of encryption function.
BSSID
It shows the BSSID address of the WLAN Broadband
Router. BSSID is a six-byte address.
Associated Clients
It shows the number of connected clients (or stations,
PCs).
TCP/IP configuration
Attain IP Protocol
It shows type of connection.
IP Address
It shows the IP address of LAN interfaces of WLAN
Broadband Router.
Subnet Mask
It shows the IP subnet mask of LAN interfaces of WLAN
Broadband Router.
Default Gateway
It shows the default gateway setting for LAN interfaces
outgoing data packets.
DHCP Server
It shows the DHCP server is enabled or not.
MAC Address
It shows the MAC address of LAN interfaces of WLAN
Broadband Router.
WAN configuration
Attain IP Protocol
It shows how the WLAN Broadband Router gets the IP
address. The IP address can be set manually to a fixed
one or set dynamically by DHCP server or attain IP by
PPPoE / PPTP connection.
IP Address
It shows the IP address of WAN interface of WLAN
Broadband Router.
Subnet Mask
It shows the IP subnet mask of WAN interface of WLAN
Broadband Router.
Default Gateway
It shows the default gateway setting for WAN interface
outgoing data packets.
Page 20 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
12
DNS1/DNS2/DNS3
It shows the DNS server information.
MAC Address
It shows the MAC address of WAN interface of WLAN
Broadband Router.
3.3.2
Setup Wizard
This page guides you to configure wireless broadband router for first time
Screen snapshot – Setup Wizard
I
Operation Mode
This page followed by Setup Wizard page to define the operation mode.
Screen snapshot – Operation Mode

Rate

3.5 / 5 based on 2 votes.

Popular RadioLabs Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top