Page 41 / 47
Scroll up to view Page 36 - 40
Wireless Broadband Router
User manual
wired client. The user has the flexibility to customize your own control policy based on these options:
Figure 56
”.
ation:
IT to access internet, others are DENIED
z
If you want to remove some MAC address, select the MAC address from the list and then click "Delete ".
e the traffic
pe permitted in your LAN. You can control which PC client can have access to these services.
z
Enable MAC Filtering
: To enable MAC Filtering, click the check box. The default is “disable
z
You can choose a default operation for your factual security or management consider
¾
Defined items in MAC list are DENIED to access internet, others are PERMIT
¾
Defined items in MAC list are PERM
Click “Apply” when you have selected,
z
MAC
: Enter the MAC Address of a station.
z
Description
: Enter the Comment of station.
z
Click "Add”. Then this wired station will be added into the” Current Access Control List" below.
4.7.2 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet websites,
email, FTP etc.).This is the place to set that configuration. Access Control allows users to defin
ty
Page 41 of 47
Page 42 / 47
Wireless Broadband Router
User manual
Enable Access Control
: To filter the outgoing packets for security or management consideration by IP
Address, either permitting or blocking access, Enable Access Control is checked.
You can choose a default operation for your factual security or management consideration:
The Undefined items beside the Rule list are PERMIT to access internet DENIED to access internet.
The Undefined items beside the Rule list are DENIED to access internet DENIED to access internet.
Rule Name
: Enter the rule name which you want, it is just only a string.
Source IP
: Enter the IP address of a station which is you want to setting.
Predefined Applications: Chose the Predefined rule in the list to be allowed or forbade accessing Internet.
Protocol & Port
: Chose protocol type (TCP/UDP) and enter the single port number or the port range to allow
or forbid.
Action
: You can choose the rule is be allowed or denied accessing Internet.
4.7.3 URL Filtering
URL (Uniform Resource Locator – e.g. an address in the form of
or
) filter rules allow you to prevent users on your network from accessing particular
websites by their URL. There are no pre-defined URL filter rules; you can add filter rules to meet your
requirements.
Page 42 of 47
Page 43 / 47
Wireless Broadband Router
User manual
z
URLs/Keywords
: Enter the specified URL site for security or management consideration by
URLs/Keywords, either permitting or blocking access.
z
Press “Delete” button to delete an existing rule.
4.7.4 Ping
This page defines rules to prevent WRT-416 WAN and LAN port being scanned.
Page 43 of 47
Page 44 / 47
Wireless Broadband Router
User manual
4.8 DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get an account,
password and your static domain name from the DDNS service providers.
Figure 62
z
User ID/Password/Host Name
: Enter your registered domain name and your username and password
for this service.
z
Information
: The status of the DDNS service connection is displayed here. To see the latest DDNS
status, click Refresh button.
4.9 MISC
4.9.1 Login ID & Password Setup
In factory setting, the default password is “guest”, and that for user is also password. You can change the
default password to ensure that no one can adjust your settings without permission. Every time you change
your password, please record the password and keep it at a safe place.
Page 44 of 47
Page 45 / 47
Wireless Broadband Router
User manual
z
New Password:
Enter your new password.
z
Confirmed New Password:
Enter your new password again for verification purposes.
Click “Apply” at the bottom of the screen to change the password.
If you forget your password, you’ll have to reset the router to the factory default (Password is “guest”)
with the reset button (see router’s front panel).
4.9.2 Remote Mgmt
This feature allows you to manage the Router from a remote location, via the Internet. To enable this feature,
check the “Management Port” checkbox, and click the Apply button.
z
Management Port:
Enter the desired port number.
z
Click “Apply” to change the Management Port.
When you want to access the web-based management from a remote site, enter http:// WAN IP
Address:8080. (e.g:
).
4.9.3 UPnP Setup
UPnP (Universal Plug and Play) is an architecture for pervasive peer-to-peer network connectivity of
intelligent appliances, wireless devices, and PCs of all form factors.
Enable UPnP Server is checked and "Apply" it.
Page 45 of 47
19216811.live