Page 31 / 149 Scroll up to view Page 26 - 30
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
25
OGU 930500105-A1
Setting Up Your Computer
1.
Browse the Setup CD-ROM and install the USB Windows driver selecting the
folder x:\driver\windows (where x is the CD-ROM driver unit).
2.
Make a double click on setup.exe file to start driver setup procedure.
3.
When the message “NOW CONNECT THE USB CABLE” should appear,
connect the USB cable from a free USB port of the computer to the
DIS-
CUS™ Multiplay Wireless VoIP AG
USB port.
4.
Enter
in the address bar of your browser to open the
DIS-
CUS™ Multiplay Wireless VoIP AG
Home Page.
USB CONNECTION >> MAC
OS 10.X
1.
Browse the CD-ROM and install the USB MAC OS 10.x selecting the folder
x:\driver\macosx
(where x is the CD-ROM drive unit).
2.
Make a double click on the Package.sit zipped file to start the unzip.
3.
Select the folder
Macintosh HD:osxdrv:Install USB ADSL
.
4.
Make a double click on the
install
script file.
5.
Restart the computer clicking on the
Restart
button.
6.
When appear the message “
NOW CONNECT THE USB CABLE
”, connect
the USB cable from a free USB port of the computer to the
DISCUS™ Multi-
play Wireless VoIP AG
USB port.
7.
Verify that your computer is configured to obtain an IP address automatically
via DHCP mode, following the next steps.
8.
Open the
Apple Menu -> System Preferences
and select
Network
.
9.
From the Show drop down list, according to the type of connection used,
select
Built-in USB ADSL
.
10.
Select the TCP/IP tab.
11.
Select
Using DHCP
from the
Configure
pop-up menu to have a dynamic IP
address.
If the system requires the path, select the hard disk main folder, normally named Macintosh
HD.
Page 32 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
26
OGU 930500105-A1
Setting Up Your Computer
FIGURE 6.
Network Panel
12.
Click
Apply Now
.
13.
Click on the
Register
button to save the changes in the Control Panel.
14.
Enter
in the address bar of your browser to open the
DIS-
CUS™ Multiplay Wireless VoIP AG
Home Page.
WI-FI CONNECTION
1.
Install your wireless adapter according to the manufacturer’s instructions and
verify that your computer is set to obtain an IP address automatically (DHCP
mode).
2.
In the configuration window of your wireless adapter scan the wireless net-
work (marked with the relevant SSID name) present in your physical environ-
ment.
3.
Select the SSID of the
DISCUS™ Multiplay Wireless VoIP AG
(default
value:
openrg
).
4.
Complete the configuration of the wireless adapter with the same parame-
ters of the
DISCUS™ Multiplay Wireless VoIP AG
which are:
It requires a computer with 802.11b/g (Wi-Fi Certified) wireless adapter installed.
You will need to properly configure your adapter to communicate with the
DISCUS™ Multi-
play Wireless VoIP AG
according to the configuration rules.
Page 33 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
27
OGU 930500105-A1
Setting Up Your Computer
RF channel; automatically detect (default = 6)
WEP encryption enable or disable (default = Disable)
WEP key size
WEP key used
5.
To check the connection, connect to the
DISCUS™ Multiplay Wireless
VoIP AG
Home Page, entering http://192.168.1.1/ in the address bar of your
browser.
Page 34 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
28
OGU 930500105-A1
Setting Up Your Computer
Page 35 / 149
Router Configuration
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
29
OGU 930500105-A1
Router
Configuration
INTRODUCTION
The Router setup program is web based, which means that it is
accessed through your web browser.
To access to Router’s web server:
1.
Launch your web browser on the computer
2.
Enter the following URL in the location or address field of your
Access to DSL router configuration pages is controlled through user
accounts. The default one is the
admin
user
with unrestricted access
to change and view configuration of the DSL Router.
You will be asked to choose the Router interface language between
English, French, Russian, Spanish, Korean, Japanese, Chinese,
Hebrew, German
and
Italian
and to insert a
User Name
and a
Pass-
word
: insert them to access to Router’s configuration panels.
The Router comes with a default IP address (192.168.1.1). If you change it, please take note
of the new Router’s IP address, otherwise a “Reset to Factory Default” operation should be
done to be able to access again to the Router.
The default username and password are both set to “admin”. It is recommended to change
these default values. Make sure you remember your user name and password, since this is
the only way you will be able to manage your Router

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top