DISCUS™ Multiplay Wireless VoIP AG

(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

25

OGU 930500105-A1

Setting Up Your Computer

1.

Browse the Setup CD-ROM and install the USB Windows driver selecting the

folder x:\driver\windows (where x is the CD-ROM driver unit).

2.

Make a double click on setup.exe file to start driver setup procedure.

3.

When the message “NOW CONNECT THE USB CABLE” should appear,

connect the USB cable from a free USB port of the computer to the

DIS-

CUS™ Multiplay Wireless VoIP AG

USB port.

4.

Enter

in the address bar of your browser to open the

DIS-

CUS™ Multiplay Wireless VoIP AG

Home Page.

USB CONNECTION >> MAC

OS 10.X

1.

Browse the CD-ROM and install the USB MAC OS 10.x selecting the folder

x:\driver\macosx

(where x is the CD-ROM drive unit).

2.

Make a double click on the Package.sit zipped file to start the unzip.

3.

Select the folder

Macintosh HD:osxdrv:Install USB ADSL

.

4.

Make a double click on the

install

script file.

5.

Restart the computer clicking on the

Restart

button.

6.

When appear the message “

NOW CONNECT THE USB CABLE

”, connect

the USB cable from a free USB port of the computer to the

DISCUS™ Multi-

play Wireless VoIP AG

USB port.

7.

Verify that your computer is configured to obtain an IP address automatically

via DHCP mode, following the next steps.

8.

Open the

Apple Menu -> System Preferences

and select

Network

.

9.

From the Show drop down list, according to the type of connection used,

select

Built-in USB ADSL

.

10.

Select the TCP/IP tab.

11.

Select

Using DHCP

from the

Configure

pop-up menu to have a dynamic IP

address.

If the system requires the path, select the hard disk main folder, normally named Macintosh

HD.

DISCUS™ Multiplay Wireless VoIP AG

(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

26

OGU 930500105-A1

Setting Up Your Computer

FIGURE 6.

Network Panel

12.

Click

Apply Now

.

13.

Click on the

Register

button to save the changes in the Control Panel.

14.

Enter

in the address bar of your browser to open the

DIS-

CUS™ Multiplay Wireless VoIP AG

Home Page.

WI-FI CONNECTION

1.

Install your wireless adapter according to the manufacturer’s instructions and

verify that your computer is set to obtain an IP address automatically (DHCP

mode).

2.

In the configuration window of your wireless adapter scan the wireless net-

work (marked with the relevant SSID name) present in your physical environ-

ment.

3.

Select the SSID of the

DISCUS™ Multiplay Wireless VoIP AG

(default

value:

openrg

).

4.

Complete the configuration of the wireless adapter with the same parame-

ters of the

DISCUS™ Multiplay Wireless VoIP AG

which are:

It requires a computer with 802.11b/g (Wi-Fi Certified) wireless adapter installed.

You will need to properly configure your adapter to communicate with the

DISCUS™ Multi-

play Wireless VoIP AG

according to the configuration rules.

DISCUS™ Multiplay Wireless VoIP AG

(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

27

OGU 930500105-A1

Setting Up Your Computer

•

RF channel; automatically detect (default = 6)

•

WEP encryption enable or disable (default = Disable)

•

WEP key size

•

WEP key used

5.

To check the connection, connect to the

DISCUS™ Multiplay Wireless

VoIP AG

Home Page, entering http://192.168.1.1/ in the address bar of your

browser.

DISCUS™ Multiplay Wireless VoIP AG

(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

28

OGU 930500105-A1

Setting Up Your Computer

(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

29

OGU 930500105-A1

Router

Configuration

INTRODUCTION

The Router setup program is web based, which means that it is

accessed through your web browser.

To access to Router’s web server:

1.

Launch your web browser on the computer

2.

Enter the following URL in the location or address field of your

browser: http://192.168.1.1

Access to DSL router configuration pages is controlled through user

accounts. The default one is the

admin

user

with unrestricted access

to change and view configuration of the DSL Router.

You will be asked to choose the Router interface language between

English, French, Russian, Spanish, Korean, Japanese, Chinese,

Hebrew, German

and

Italian

and to insert a

User Name

and a

Pass-

word

: insert them to access to Router’s configuration panels.

The Router comes with a default IP address (192.168.1.1). If you change it, please take note

of the new Router’s IP address, otherwise a “Reset to Factory Default” operation should be

done to be able to access again to the Router.

The default username and password are both set to “admin”. It is recommended to change

these default values. Make sure you remember your user name and password, since this is

the only way you will be able to manage your Router