PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

24

OGU 930500275-A1

Setting Up Your Computer

FIGURE 5.

Network panel on MAC OS 10.x

5.

Click Apply Now.

6.

Click on the

Register

button to save the changes in the Control Panel.

7.

Enter

in the address bar of your browser to open the

PRG

AV4202N

Home Page.

USB CONNECTION

To connect your first Computer to the

PRG AV4202N

using USB port, you

have to install the Router’s USB driver on your computer.

Before connecting the USB Cable to the USB Port of the

PRG AV4202N

you have to run the setup

software and to follow the instructions. Connect the USB Cable only when required from the installation

software.

Only one Windows or Macintosh computer can be directly connected to the

PRG AV4202N

using the

USB connection. Additional computers can be added to your network using the others connection such

as Ethernet or Wi-Fi.

PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Setting Up Your Computer

OGU 930500275-A1

25

USB CONNECTION >> MS

WINDOWS

Using Windows 98SE the system could require the Operating System installation CD-ROM.

1.

Browse the Setup CD-ROM and install the USB Windows driver selecting

the folder x:\driver (where x is the CD-ROM driver unit).

2.

Make a double click on setup.exe file to start driver setup procedure.

3.

When the message “NOW CONNECT THE USB CABLE” appears, connect

the USB cable from a free USB port of the computer to the

PRG AV4202N

USB port.

4.

Enter

in the address bar of your browser to open the

PRG

AV4202N

Home Page.

USB CONNECTION >> MAC

OS 10.X

As MAC OS 10.x will automatically recognize the device, no USB driver installa-

tion is required.

1.

Enter

in the address bar of your browser to open the

PRG AV4202N

Home Page.

WI-FI CONNECTION

It requires a computer with 802.11b/g (Wi-Fi Certified) wireless adapter installed.

1.

Install your wireless adapter according to the manufacturer’s instructions and

verify that your computer is set to obtain an IP address automatically (DHCP

mode).

You will need to properly configure your adapter to communicate with the

PRG AV4202N

according

to the configuration rules.

2.

In the configuration window of your wireless adapter scan the wireless net-

work (marked with the relevant SSID name) present in your physical envi-

ronment.

3.

Select the SSID of the

PRG AV4202N

4.

Complete the configuration of the wireless adapter with the same parame-

ters of the

PRG AV4202N

which are:



RF channel; automatically detect (default = 6)



WEP encryption enable or disable (default = Disable)



WEP key size

PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

26

OGU 930500275-A1

Setting Up Your Computer



WEP key used

5.

To check the connection, connect to the

PRG AV4202N

Home Page, enter-

ing http://192.168.1.1/ in the address bar of your browser.

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Router Configuration

OGU 930500275-A1

27

Router

Configuration

INTRODUCTION

The Router setup program is web based, which means that it is accessed

through your web browser.

To access to Router’s web server:

1.

Launch your web browser on the computer

2.

Enter the following URL in the location or address field of your browser:

The Router comes with a default IP address (192.168.1.1). If you change it, please take note of the

new Router’s IP address, otherwise a “Reset to Factory Default” operation should be done to be able

to access again to the Router.

Access to DSL router configuration pages is controlled through user accounts.

The default one is the

admin

user with unrestricted access to change and view

configuration of the DSL Router.

The default username and password are both set to “admin”. It is recommended to change these de-

fault values. Make sure you remember your user name and password, since this is the only way you

will be able to manage your Router

You will be asked to choose the Router interface language between

English,

French, Russian, Spanish, Korean, Traditional Chinese, Japanese, German,

Italian

and

Simplified Chinese

and to insert a

User Name

and a

Password

: in-

sert them to access to Router’s configuration panels.

PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

28

OGU 930500275-A1

Router Configuration

If not already configured, at the first login the

Installation Wizard

panel will be

shown to configure the Router connection parameters, otherwise the

Home

page

will be opened as shown in Figure 1.

The

Home page

contains a menu on the left - always available in all the web

pages which is the starting point for any Router’s configuration.

The complete menu has the following main items:

1.

Home

: it shows a graphical representation of your network.

2.

Map View

: it displays the Network Map of attached or configured devices

3.

Quick Setup

: it allows to quickly perform the Router’s connection setup

4.

Network Connections

: it shows the status of network connections allowing

to modify them or to create new ones

5.

Security

: it allows to set security settings

6.

Voice over IP

: it allows to set VoIP accounts

7.

Parental Control

: it allows to set Parental Control filtering

8.

QoS

: it gathers all QoS parameters and settings

9.

Advanced

: it allows the access to the advanced configuration panels and to

define

Router

parameters

devoted

to

user

access,

log

management,

Router’s time, Backup Router’s configuration, etc.

10.

System Monitoring

: a menu to show and run diagnostic test for trouble-

shooting or system behavior analysis and to access to Device Information

and Statistics

11.

Logout

: to logout from Router’s session.

In order to submit the changes of most of device parameters you have to click the

Apply

button to save

permanently your changes. In some case a Router’s reboot is required.