DISCUS™ DRG A225G

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

18

SETUP WIZARD

The Router setup program is web based, which means that it is accessed

through your web browser.

To access to Router’s web server:

1. Launch your web browser on the computer

2. Enter the following URL in the location or address field of your browser:

http://192.168.1.254

The Router comes with a default IP address (192.168.1.254). If you change it, please take note of the

new Router’s IP address, otherwise a “Reset to Factory Default” operation should be done to be able

to access again to the Router.

Access to DSL router configuration pages is controlled through user accounts.

The default one is the

user

account

The default username and password are both set to “3play”. It is recommended to change these de-

fault values. Make sure you remember your user name and password, since this is the only way you

will be able to manage your Router

The

Setup Wizard

enables speedy and accurate configuration of your Internet

connection and other important parameters.

FIGURE 5.

Setup Wizard Panel

To go on with the Setup wizard, press the

NEXT

button.

Downloaded from

www.Manualslib.com

manuals search engine

DISCUS™ DRG A225G

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

19

ISP Parameters

To activate your internet connection, you should insert the data provided by

your ISP. Please insert the user name and the Password.

FIGURE 6.

ISP Parameters Panel

Wireless

This page allows you to enable the wireless functionality of the router. For addi-

tional information please refer to chapter “Wireless”.

FIGURE 7.

Wireless Panel

Firewall

This page allows you to enable the firewall functionality of the router. The de-

vice provides extensive firewall protection by restricting connection parameters

to limit the risk of hacker attack, and defending against a wide array of common

attacks. However, for applications that require unrestricted access to the Inter-

net, you can configure a specific client/server as a demilitarized zone (DMZ).

Downloaded from

www.Manualslib.com

manuals search engine

DISCUS™ DRG A225G

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

20

FIGURE 8.

Firewall Panel

Confirm

Check that all entered data are correct and then press the

FINISH

button to

save your data on the Router and, if everything has been properly set, to start

surfing.

FIGURE 9.

Confirm Panel

Downloaded from

www.Manualslib.com

manuals search engine

DISCUS™ DRG A225G

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

21

WIRELESS

The gateway can be quickly configured as a wireless access point by setting the

service set identifier (SSID) and channel number. It also supports encryption

and client filtering.

Channel and SSID

This page allows you to define the SSID and the Channel ID for wireless con-

nection. These parameters are used for the mobile stations to connect to this

access point. You must specify a common radio channel and SSID (Service Set

ID) to be used by the Router and all of its wireless clients. Be sure you config-

ure all of its clients to the same values

Table 2 Channel and SSID Parameters Table

Parameter

Description

SSID

Service Set ID. The SSID must be the same on the

VoIP Router and all of its wireless clients.

SSID Broadcast

Enable or disable the broadcasting of the SSID.

Disabling SSID broadcast will provide increased

security by hiding the SSID of your wireless net-

work.

Wireless Mode

This device supports both 11g and 11b wireless

networks. Make your selection depending on the

type of wireless network that you have. You may

use “Mixed (11b+11g)” to provide compatibility with

both 11b and 11g wireless clients.

Channel

The radio channel used by the wireless router and

its clients to communicate with each other. This

channel must be the same on the VoIP Router and

all of its wireless clients.The VoIP Router will

automatically assign itself a radio channel, or you

may select one manually.

Downloaded from

www.Manualslib.com

manuals search engine

DISCUS™ DRG A225G

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

22

FIGURE 10.

Channel and SSID Panel

Wireless Security

To make your wireless network safe, you should turn on the security function.

The VoIP Router supports the following security mechanism:

•

WPA/WPA2

•

WPA2 Only

•

WEP

•

Disabled

To enable one of the above encryption methods, access the “security” pages

located at the following path: Wireless>>Security. By default the WPA/WAP2

method is enabled.

WPA/WPA2 and WPA2 Only

Wi-Fi Protected Access (WPA) combines temporal key integrity protocol (TKIP)

and 802.1x mechanisms. It provides dynamic key encryption and 802.1x au-

thentication service.

Wi-Fi Protected Access 2 (WPA2) is a product certification that is available

through the Wi-Fi Alliance. WPA2 certifies that wireless equipment is compati-

ble with the IEEE 802.11i standard. The WPA2 product certification formally re-

Downloaded from

www.Manualslib.com

manuals search engine