9

This gateway supports WPS (WiFi Protected Set-Up) which is a quick method of

connecting a WPS enabled device to the gateway. The connecting device must support

WPS and have wireless turned on. Check your device manual or the manufacturer’s

website to confirm WPS support.

To connect, press the WPS button on the front of gateway below the indicator lights

and within 1 minute, press the WPS button on the connecting device. The WPS button

will be a physical button on a device like a printer, or virtual or such as a software

button on a computer, mobile phone or tablet.

The two devices will establish a connection and the connection and the gateway will

recognise the wireless device.

Power

Ethernet

Wireless

WPS

Voice 1

Voice 2

Broadband

Internet

3G

3-0 03782 DEVICES Business Broadband Gateway QSG.indd

9

20/07/12

4:48 PM

10

Securing your gateway

The most effective method to keep your gateway secure is to keep your gateway and

Wifi password details in a safe place and protect against unauthorised physical access

to your gateway.

Your gateway settings are password protected with an administrator login. Telecom

recommends you create a unique password to protect access to your gateway.  To do

this, you need to access use the gateway’s User Interface so complete the following

steps:

1.

Open a web browser, type

192.168.1.254

into the address bar and press enter.

This will take you to the User Interface.

2.

Click on the

Administrator

tab on upper menu to access the Administrator menu;

then click on

Management

on the left side menu to display all sub-options; then

click on

Administration

.

3-0 03782 DEVICES Business Broadband Gateway QSG.indd

10

20/07/12

4:48 PM

11

3.

When prompted, enter the gateway Administrator

Username

and

Password

into

the appropriate fields then click

Submit

.

The default Username is

admin

(lower case), the default Password is

admin

(lower case).

4.

Enter an Administrator username and password of your choosing, then click

OK

.

The next time you want to change your gateway settings you must log in using your

unique Administrator username and password.

Note: If you forget your Administrator credentials you will need to reset the gateway

to factory default, via the Reset button on the back of the gateway. Telecom does not

have visibility of your gateway settings.

3-0 03782 DEVICES Business Broadband Gateway QSG.indd

11

20/07/12

4:48 PM

12

Applying a Static IP (optional)

If you have a static IP from Telecom, you must follow the steps below.

Note: you need your Telecom unique registered broadband username and

password to complete this step.

1.

Open a web browser, type

192.168.1.254

into the address bar and press

enter. This will take you to the User Interface (or UI).

2.

Click on

Administrator

tab in the upper menu; then click on

Gateway

Configuration

in the left hand menu to display the sub-menu; then click

on

Internet

.

3.

If prompted, enter your Administrator credentials username and password

and click Submit.

Note the default Username is

admin

and Password is

admin

unless you

have changed it.

Note: See the previous Step 9 if you need help with these details.

3-0 03782 DEVICES Business Broadband Gateway QSG.indd

12

20/07/12

4:48 PM

13

4.

On the

Internet Access Configuration

page, scroll down to Main Internet Access

and locate

PPP Parameters

.

3-0 03782 DEVICES Business Broadband Gateway QSG.indd

13

20/07/12

4:48 PM