Page 6 / 22 Scroll up to view Page 1 - 5
4
3
Connect to filter
ADSL filters are required for every phone socket in use, including phone lines, EFTPOS
terminals, faxes or digital TV decoders.  Filters remove interference on your phone
lines and improve your broadband service.
If you use 4 or more phone sockets in your premise, or if you have a PABX, monitored
security or medical alarm, you must have a Central Splitter installed. Call Telecom on
0800 BUSINESS (0800 2874 6377) to arrange installation.
a.
Connect the ADSL filter to the phone socket.
b.
If you use a telephone, fax machine or EFTPOS terminal etc. at the same phone
socket, connect that device into the ADSL filter socket marked PHONE.
c.
Connect the ADSL cable into the ADSL filter socket marked ADSL.
d.
Connect the other end of the ADSL cable into the gateway port marked DSL.
DSL
USB
LAN
RESET
FXS
POWER
I/O
1
2
3
4
1&2
W
A
N
3-0 03782 DEVICES Business Broadband Gateway QSG.indd
4
20/07/12
4:48 PM
Page 7 / 22
5
4
Connect your computer
a.
Connect the ethernet cable into any of the numbered LAN ports (1 to 4)
in the gateway.
b.
Connect the other end of the ethernet cable into the ethernet port on your
computer.
Look for this symbol
on your computer if you are not sure.
DSL
USB
LAN
RESET
FXS
POWER
I/O
1
2
3
4
1&2
W
A
N
3-0 03782 DEVICES Business Broadband Gateway QSG.indd
5
20/07/12
4:48 PM
Page 8 / 22
6
5
Connect to power
a.
Plug in the power supply to the electrical power socket. Plug other end of the
power cable into the POWER socket in the gateway.
b.
Ensure the power is turned on at the wall, and push in the ON/OFF button
on the back of the gateway to turn the gateway on.
DSL
USB
LAN
RESET
FXS
POWER
I/O
1
2
3
4
1&2
W
A
N
3-0 03782 DEVICES Business Broadband Gateway QSG.indd
6
20/07/12
4:48 PM
Page 9 / 22
7
6
Connect to broadband
Please wait up to 5 minutes for the gateway to establish a broadband connection.
Your gateway lights will tell you when the connection is working correctly. If the
POWER
light is off - check Step 5.
The lights should be as follows:
The
POWER
and
BROADBAND
lights should be solid
GREEN
not blinking.
The
ETHERNET
and
INTERNET
lights should be
GREEN
and blinking.
When the gateway lights are correct, open a web browser on your computer
such as Internet Explorer, Safari, Firefox or Chrome. If your connection is working
you will see a valid web page and be able to surf the internet.
If not, restart your computer and open an internet browser and try again.
If after 5 minutes the BROADBAND light is off or flashing - check Step 3.
If the light remains off or flashing, you may have a faulty phone socket.
Try connecting using another phone socket.
If the
ETHERNET
light is off - check Step 4. Ensure the ethernet cable is correctly
connected to the ethernet port of your computer, and a LAN port on your gateway.
If you continue to experience problems, call our Business Broadband helpdesk
on
0800 BUSINESS (2874 6377).
3-0 03782 DEVICES Business Broadband Gateway QSG.indd
7
20/07/12
4:48 PM
Page 10 / 22
8
7
Connect to WiFi (wireless networking)
Before you begin, ensure you can connect to the internet using the Ethernet
connection.
Your gateway has a WiFi network ready to use out of the box. Your gateway has a
unique
SSID
(or Network Name) and
WiFi Key
(or Wireless Password or Key) to make
connecting using WiFi easy. These details are found on the information label on the
side of the gateway and on the WiFi sticker supplied in the box.
The WiFi network is designed to provide a strong level of network security. To keep your
network secure, keep your SSID/WiFi Key out of public view.
To connect a wireless enabled device (computer, tablet, mobile phone etc) using the
default
SSID
and
WiFi Key
, complete the following steps:
1.
Use your device’s network connection manager or wizard to search for your WiFi
network.  If you are not sure how to do this, refer to the help function for your
device’s operating system, or the manufacturer’s web site or help desk.
2.
Find and select your wireless SSID. Example:
Telecom-1234
3.
When prompted enter your WiFi Key.  Example:
TT73H9VSK7CHU
4.
If the device connection manager allows you to save your SSID and WiFi Key details
then do so. Otherwise you may have to repeat these steps each time you connect.
5.
On your device open a web browser such as Internet Explorer, Safari, Firefox or
Chrome. If the a web page loads correctly and you can surf the internet, you are
connected to your WiFi network.
Model Name:
Pace V5542 Gateway
Z1533
WARNING: Use only the power supply
AD8330-1LF with this product
Made in China
CERTIFIED
SSID: Telcom-1234
Wi-Fi Key: TT73H9VSK7CHU
MID:
MAC:
PAAAABG1234211234
000CC39004D0
Supply: +12V
3A
USE Rating : +5V
1A
3-0 03782 DEVICES Business Broadband Gateway QSG.indd
8
20/07/12
4:48 PM

Rate

3.5 / 5 based on 2 votes.

Popular Pace Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top