30

3.

Bridge:

Click the radio button to enable

DHCP (Get IP dynamically from ISP)

. Click

“Next”

after your

choice and the following screen will pop-up:

±

Select LAN:

Select LAN group from the drop down manual or leave it as it’s default then click

“Apply”

after your setting.

±

Click

“Apply”

after your setting.

31

STEP 2.

Click

“Apply”

after setup. Following windows will pop-up.

The device’s system will save and activate your setting after clicking the

“Apply”

button. The following

windows will pop up after the reboot process.

±

Check the following items when the above window pop-up.

;

Name:

Show the

ISP

name selected in

STEP 1

.

;

Type:

Show the

Encapsulation

type selected in

STEP 1

.

;

Username:

Show the

Username

manually entered in

STEP 1

.

;

Password:

Show the

Password

manually entered in

STEP 1

.

;

VPI:

Show the

VPI

setting as shown in

STEP 1

.

;

VCI:

Show the

VCI

setting as shown in

STEP 1

.

±

A

Connection Profile

(Normally show the ISP Name) will be added to the left side of the

configuration frame under

WAN Setup

.

32

NOTE:

If the final setting are differ from what you’d selected in

STEP 1

, click

EZ SETUP

and redo the setup

procedures or else check your dealer immediately for technical support.

NOTE:

The WL-8064ARM Wireless ADSL2/2+ Router can be configured to maintain up to 8 Connection

Profiles. Different Connection Profiles may be required if you connect to more than one ADSL service

provider, or if you vary the connection type/setting you use.

Note that in many cases, only one Connection Profile will be required and only one Connection

Profile in used at one time.

33

STEP 3.

Go to

“STATUS”

Æ

“Modem Status”

and the following window will pop-up. Check the

“Connection Status”

,

“Us Rate”

and

“Ds Rate”

, the numbers/data show you the actual ADSL

connection speed in Kbps.

STEP 4.

address field then press

“Enter”

.

The following Google website index page will display on your screen. This shows your ADSL connection

is correctly set and access to the Internet is now available.

34

4.3 CONFIG

The

CONFIG

configuration page allows you to create new connections, edit existing connections, and

configure other basic settings in WAN and LAN mode.

The

CONFIG

Menu is divided into two sections :

LAN Setup

and

WAN Setup

.

WAN Setup

will be dealt with

first.