WF-2409

User Manual

¾

IP Address

The Local IP address that your Internet access into Subnet mask

¾

Subnet mask

Specify a Subnet Mask for your WAN segment

¾

Default gateway

It is provided by your ISP

¾

Primary DNS

DNS server is used for resolve domain name. Your ISP will provides you with at least one DNS

IP address, input IP address of your DNS server in this field

¾

Secondary DNS

Input IP address of backup DNS server, or you can leave this field blank

¾

User Name

Iput User name your ISP provides

¾

Password

It is provided by your ISP

4.2.6.

Wireless Configuration

You can choose “Enable” or “Disable” to enable or disable the wireless function. The default

setting is “enable”. If you chose the “Disable” status, the router will become a wired router

without wireless function, so be careful when you choose this status.

Figure 4-13

You can choose “Enable” or “Disable” to enable or disable the wireless function. The default

setting is ”enable”. If you chose the “Disable” status, the router will become a wired broadband

router without wireless function, so be careful when you choose this status.

¾

SSID

SSID (Service Set Identifier) is your wireless network's name shared among all points in a

wireless network. The SSID must be identical for all devices in the wireless network. It is

case-sensitive and must not exceed 32 characters. Make sure all points in the wireless network

have the same SSID. For added security, you should change the default SSID to a unique name

¾

Security

35

WF-2409

User Manual

The item allows you to encrypt your wireless communication, and you can also protect your

wireless network from unauthorized user access. It supplies “None”, “WEP”, “WPA-PSK”,

“WPA2-PSK” and “WPA/WPA2-PSK” five different encryption modes. And you can also use

WPS function and then it will be encrypted to WPA2-AES mode automatically

4.3.

WPS Settings

Wi-Fi Protect Setup (WPS) function can let you create a safety network easily. You can through

‘PIN Input Config (PIN)’ or ’Push Button (PBC)’to encrypt your network. This router also

provides WPS button, you only need to push the WPS button in this router and the wireless

network card that support WPS function, then the router will be encrypted to WPA2-AES mode

automatically

Note:

If you have configured encryption mode in your router, then when you use this WPS function,

please configure the authentication type to none, and then it will be encrypted to WPA2-AES

mode automatically. If you don’t want to change your authentication type, then when you use

this function, the router will be encrypted to the mode that you have configured.

Figure 4-14

¾

WPS Status: you can use this function to setup the wireless connection between this router

and wireless network card. The default is disable.

¾

AP PIN Code: this code can mark a wireless product

¾

Wireless Host PIN Code: input the PIN of wireless network card that support WPS

function. Click connect, when it connect successfully, it will be encrypted to WPA2-PSK

¾

WPS PBC settings: Click connect, when it connect successfully, it will be encrypted to

WPA2-PSK

36

WF-2409

User Manual

¾

WPS Configuration: display the encryption information

WPS can connect the wireless adapter and the router in a safe way. If you have a wireless

network card which has WPS button, you may set up a safe network via the following methods

Method 1:

1. Push the WPS button in the Router until the LED is flashing

2. Push the WPS button in the wireless network card until the following window appears

Figure 4-15

3. The next is the safe connection between the adapter and the router, please wait

4. The connect between the adapter and the router is success

Method 2:

1. Push the WPS button in the Router until the LED is flashing

2. Push the ‘Push button Config (PBC)’ in the Wi-Fi protect setup of the adapter until the

following picture appears

Figure 4-16

3. The next is the safe connection between the adapter and the router, please wait

4. The connect between the adapter and the router is success

37

WF-2409

User Manual

Method 3:

1. Input the PIN code of the adapter’s WPS page into the router’s WPS configure page, then

click ’connect’

Figure 4-1

Figure 4-17

2. Push the ‘PIN Input Config (PIN)’ in the Wi-Fi protect setup of the adapter

Figure 4-18

3. Select this router in the pop-up window, then click ‘Select’

38

WF-2409

User Manual

Figure 4-19

4. Please wait until the following window appears, the connect between the adapter and the

router will connect automatically

Figure 4-20

Method 4:

1. Click ‘connect’ in the router’s WPS PBC configure page

Figure 4-21

2. Push the ‘Push button Config (PBC)’ in the Wi-Fi protect setup of the adapter until the

39