WF-2409

User Manual

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Verify your computer's network settings are correct and check the cable connection between the

router and the computer.

In order to make the whole network operate successfully, it is necessary to configure the

300Mbps Wireless-N Router through your computer has a WEB browser installed. Please

follow up the steps listed below.

3.3.

Login

¾

Open a web browser (Safari, Internet Explorer, etc.) on the computer you have just

connected to the router, type http://192.168.1.1 in the address bar, and press enter

Figure 3-18

¾

In the pop-up window, enter the user name

guest

and password

guest

and then click OK

25

WF-2409

User Manual

Figure 3-19

¾

After you have logged in, the router's user interface will be displayed. The left menu shows

the main options to configure the system, and the right screen is the summary information for

viewing and adjusting the configurations.

Figure 3-20

26

WF-2409

User Manual

4.

Router Setup

4.1.

System Information

This feature provides running status information and detailed information about router.

4.1.1.

System Info

Show current running information of System.

Figure 4-1

4.1.2.

WAN

This feature provides running status information of the WAN port (the port connect to the

Internet)

27

WF-2409

User Manual

Figure 4-2

¾

Connection Type: Display router’s current connection type, It should be one of “PPPoE”,

“DHCP”, “Static IP”, depending on what kind of connection type your ISP provides.

¾

MAC Address: The physical address of WAN port, this is a unique address assigned by

manufacturer.

¾

IP Address

:

The IP address you obtained after connect to the Internet, if you haven’t

connected to the Internet yet, this field is 0.0.0.0.

¾

Mask: The Subnet mask you obtained after connect to the Internet, if you haven’t

connected to Internet yet, this field is 0.0.0.0

¾

Gateway: The IP address of Default gateway you obtained after connect to the Internet, if

you haven’t connected to Internet yet, this field is 0.0.0.0.

¾

Primary DNS: The DNS server translates domain or website names into IP address, input

the most common DNS server address you used or provided by your ISP.

¾

Secondary DNS: Input IP address of a backup DNS server or you can leave this field blank

¾

Link Status: Display router’s current connection Status

¾

Connected time: Display the time since router have connectted to the Internet

4.1.3.

LAN Info

This item provides information about router’s LAN port, display LAN port’s physical address,

IP address and current data status about receiving and sending

28

WF-2409

User Manual

Figure 4-3

4.1.4.

Wireless

This item provides current running information of wireless.

Figure 4-4

¾

Wireless status: Display wireless interface status is enabled or not

¾

SSID: SSID (Service Set Identifier) is your wireless network's name shared among all

points in a wireless network.

¾

Mode: Current wireless mode of wireless router

¾

Channel

:

Display current channel of your wireless router.

¾

MAC Address

:

The MAC address is used for wireless communication

¾

WPS Status: Display WPS (Wi-Fi Protected Setup) status is enabled or not.

29