Page 31 / 63 Scroll up to view Page 26 - 30
300Mbps Wireless-N Broadband Router
User Manual
30
4.1.5.
Router Status
This item provides current running information of System.
Figure 4-5
4.1.6.
Traffic Statistics
This item provides statistics information about the bits router sends and received.
Figure 4-6
4.2.
Quick Setup
Providing you the convenient and simplest method for configure the router, the purpose of this
item is to provide an easy way for you to use it and configure your router to access the Internet
quickly; including
DHCP
dynamic
,
PPPoE
,
Static
and
Wireless Configuration
. This
is the most convenient tool for you to configure router.
4.2.1.
DHCP (dynamic)
Figure 4-7
After select this item, you will obtain an IP address from your ISP automatically, those ISP who
supply Cable modem always use DHCP technology.
Page 32 / 63
300Mbps Wireless-N Broadband Router
User Manual
31
4.2.2.
PPPoE
Figure 4-8
If your ISP provides you the PPPoE service (all ISP with DSL transaction will supply this
service, such as the most popular ADSL technique), please select this item. In the “Convenient
configuration” Y
ou can input your PPPoE username and password to access the Internet.
PPPoE Username: Input PPPoE username provided by ISP
PPPoE Password: Input PPPoE password provided by ISP.
4.2.3.
Static
Figure 4-9
This item should only be used when users use a static IP address to access Internet, you should
input your “WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain
name server)” according to the information provided by your ISP. And every IP address should
be input in appropriate IP field, a IP address only divided into four IP o
ctets by sign“.”
is
acceptable.
WAN IP address: The IP address that your Internet access into
Subnet mask: Specify a Subnet Mask for your WAN segment
Default gateway: It is provided by your ISP
Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you
with at least one DNS IP address, input IP address of your DNS server in this field
Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank.
Page 33 / 63
300Mbps Wireless-N Broadband Router
User Manual
32
4.2.4.
Wireless Configuration
You can choose “Enable” or “Disable” to enable or disable the wireless fu
nction. The default
setting is
“enable”. If you chose the “Disable” status, the router will become a wired broadband
router without wireless function, so be careful when you choose this status.
Figure 4-10
SSID: SSID (Service Set Identifier) is your wireless network's name shared among all
points in a wireless network. The SSID must be identical for all devices in the wireless
network. It is case-sensitive and must not exceed 32 characters. Make sure all points in the
wireless network have the same SSID. For added security, you should change the default
SSID to a unique name.
Region: Choose a correct region which fit your use environment.
Channel: Wireless router communicates to wireless cards in a particular channel, which
can reduce interference between different channels.
Authentication Type: Different authentication types use different encryption types, which
can encrypt wireless data to protect your wireless communication.
4.2.5.
MAC Clone
The WAN port of router has a unique MAC address assigned by manufacturer; it called as
“Default MAC”. The “Clone MAC” is used for some special situations; For example, ISP only
allows certain MAC address to acce
ss the Internet, thus you can modify your WAN port’s MAC
address in accord with the requirement of ISP, avoiding ISP’s detection
.
Figure 4-11
Page 34 / 63
300Mbps Wireless-N Broadband Router
User Manual
33
4.3.
WPS Settings
Wi-Fi Protect Setup (WPS) function can let you create a safety network easily. You can through
PIN Input Config (PIN)
or
Push Button (PBC)
to encrypt your network. This router also
provides WPS button, you only need to push the WPS button in this router and the wireless
network card that support WPS function, then the router will be encrypted to WPA2-AES mode
automatically
Note:
If you have configured encryption mode in your router, then when you use this WPS function,
please configure the authentication type to none, and then it will be encrypted to WPA2-AES
mode automatically. If you
don’t
want to change your authentication type, then when you use
this function, the router will be encrypted to the mode that you have configured.
4.3.1.
WPS Settings
Figure 4-12
WPS Status: You can use this function to setup the wireless connection between this router
and wireless network card. The default is Enable.
AP PIN Code: This code can mark a wireless product.
Add A New Device: Add a new device by WPS.
4.3.2.
Add a New Device
Figure 4-13
Enter the new device
s PIN: This code can mark a wireless product.
Press the button of the new device in two minutes: New device will send a PIN code to
wireless router.
Page 35 / 63
300Mbps Wireless-N Broadband Router
User Manual
34
4.3.3.
WPS Configuration
Display the encryption information.
Figure 4-14
WPS can connect the wireless adapter and the router in a safe way. If you have a wireless
network card which has WPS button, you may set up a safe network via the following methods
Method 1:
1. Push the WPS button in the Router until the WPS LED is flashing several times
2. Push the WPS button in the wireless network card for about 3-5seconds
3. The safe connection will be established automatically
Method 2:
1. Input the PIN code of the adapter
s WPS page into the router
s WPS configure page, then
click
connect
Figure 4-15
Figure 4-16
2. Push the
PIN Input Config (PIN)
in the Wi-Fi protect setup of the adapter
Figure 4-17
3. Select this router in the pop-up window, then click
Select
4. The connection between the adapter and the router is be established automatically.
Method 3:
1. Select
Input PIN from AP
in WI-FI protect setup page, input PIN of the router, then click

Rate

3.5 / 5 based on 2 votes.

Popular Netis Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top