300Mbps Wireless-N Broadband Router

User Manual

10

Figure 2-3



Attach one end of an Ethernet cable to your computer’s Ethernet port, and the other end to

one of the LAN ports of your router.



Connect another Ethernet cable from your Cable/DSL modem to the WAN port of your

router.



Connect the single DC output connector of the power adapter to the power jack on the back

of the router and plug the Power Adapter into an AC outlet.

300Mbps Wireless-N Broadband Router

User Manual

11

3.

Login

You can manage the 300Mbps Wireless-N Broadband Router through the Web browser-based

configuration utility. To configure the device via Web browser, at least one properly configured

computer must be connected to the device via Ethernet or wireless network. The 300Mbps

Wireless-N Broadband Router is configured with the

default IP address of 192.168.1.1

and

subnet mask of 255.255.255.0

and its

DHCP server is enabled by default

. Before setting up

the Router, make sure your PCs are configured to obtain an IP address automatically from the

Router by the steps below.

3.1.

Configure computer

3.1.1.

Windows 98/Me

1. Go to Start



Settings



Control Panel.

2. Find and double-click the Network icon. The Network dialog box appears.

3. Click the Configuration label and ensure that you have network card.

4. Select TCP/IP. If TCP/IP app

ears more than once, please select the item that has an arrow “



”

pointing to the network card installed on your computer. DO NOT choose the instance of

TCP/IP with the words “Dial Up Adapter” beside it.

5. Click Properties. The TCP/IP Properties dialog box appears.

6. Ensure the Obtain IP Address Automatically is checked.

7. From the WINS Configuration dialog box, Ensure that Disable WINS Resolution is checked.

8. From the Gateway dialog box, remove all entries from the Installed gateways by selecting

them and clicking Remove.

9. From the DNS Configuration dialog box, remove all entries from the DNS Server Search

Order box by selecting them and clicking Remove. Remove all entries from the Domain Suffix

Search Order box by selecting them and clicking Remove. Click Disable DNS.

10. Click OK, back to Network Configuration dialog box

11. Click OK, if prompted to restart, click YES.

3.1.2.

Windows 2000

Please follow the steps below to setup your computer:

1. Go to Start



Settings



Control Panel

300Mbps Wireless-N Broadband Router

User Manual

12

Figure 3-1

2. Double click the icon Network and Dial-up Connections

3. Highlight the icon Local Area Connection, right click your mouse, and click Properties

Figure 3-2

4. Highlight Internet Protocol (TCP/IP), and then press Properties button

300Mbps Wireless-N Broadband Router

User Manual

13

Figure 3-3

5. Choose Obtain an IP address automatically and Obtain DNS server address automatically,

and then press OK to close the Internet Protocol (TCP/IP) Properties window

Figure 3-4

6. Press OK to close the Local Area Connection Properties window

300Mbps Wireless-N Broadband Router

User Manual

14

Figure 3-5

3.1.3.

Windows XP

Please follow the steps below to setup your computer:

1. Go to Start



Settings



Control Panel

2. Click Network and Internet Connections

Figure 3-6

3. Click Network Connections