Page 16 / 149 Scroll up to view Page 11 - 15
N600 Wireless Dual Band Router WNDR3400 User Manual
Configuring Your Internet Connection
1-3
v1.0, August 2010
The Checking for Firmware Updates screen displays unless you previously cleared the
Check
for Updated Firmware Upon Log-in
check box.
If the router discovers a newer version of the software, you are asked if you want to upgrade to
the new software (see
“Upgrading the Router Firmware” on page 4-1
for details). If no new
firmware is available, the following message displays.
Figure 1-2
Figure 1-3
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Configuring Your Internet Connection
1-4
v1.0, August 2010
3.
The Basic Settings screen displays showing the wireless router’s settings.
If the wireless router is connected to the Internet, you can click the
Knowledge Base
link or
the
Documentation
link under Web Support to view support information or the
documentation for the wireless router. If you do not click
Logout
, the wireless router waits for
5 minutes after no activity before it automatically logs you out.
Selecting a Language for Your Screen Display
Using the Select Language drop-down menu, located in the upper right corner of the Router
Manager screen, you can display the router manager screens in any of languages shown in Figure
1-5:
Figure 1-4
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Configuring Your Internet Connection
1-5
v1.0, August 2010
Figure 1-5
The language is set to English by default. The default language, as well as German, Russian, and
Portuguese are always stored in memory. When you select a language other than those
automatically stored in flash memory, if you are connected to the Internet at the time you select it,
that language is also stored in memory.
If you are connected to the Internet and select a language that is not already stored in flash
memory, the language is downloaded from the NETGEAR server and stored in the current
language partition of flash memory.
If you are not connected to the Internet when you select a language, you can only select as the
current language one of the languages that is stored in flash memory.
To specify a language to be used on your router manager screens, do the following:
1.
Expand the list and select the language you want.
2.
Click
Apply
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Configuring Your Internet Connection
1-6
v1.0, August 2010
The language you select is then downloaded and displayed in the language selection box, and
your screen display will be in the selected language.
Using the Setup Wizard
You can manually configure your Internet connection using the Basic Settings screen, or you can
allow the Smart Setup Wizard to detect your Internet connection. The Smart Setup Wizard
searches your Internet connection for servers and protocols to determine your ISP configuration.
This feature is not the same as the Smart Wizard on the
Resource CD
that is used for installation.
To use the Smart Setup Wizard to assist with configuration or to verify the Internet connection
settings, follow this procedure:
1.
From the top of the main menu, select
Setup Wizard
.
2.
Select
Yes
for the Auto-Detect Connection Type, and then click
Next
to proceed.
3.
Enter your ISP settings, as needed.
4.
At the end of the Setup Wizard, click
Test
to verify your Internet connection. If you have
trouble connecting to the Internet, see
Chapter 8, “Troubleshooting
.”
Viewing or Manually Configuring Your ISP Settings
To view or configure the basic settings:
1.
Log in to the wireless router as described in
“Logging In to Your Wireless Router” on
page 1-2
.
2.
On the Basic Settings screen, select
Yes
or
No
depending on whether your ISP requires a
login. This selection changes the fields available on the Basic Settings screen.
Yes
. If your ISP requires a login, select the encapsulation method. Enter the login name. If
you want to change the login time-out, enter a new value in minutes.
No
. If your ISP does not require a login, enter the account name, if required, and the
domain name, if required.
Note:
If you are not connected to the Internet and select a language that is not stored
in flash memory, your selection may fail. If you see a “download fails”
message after your language selection, make sure you are connected to the
Internet and make your selection again.
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 149
N600 Wireless Dual Band Router WNDR3400 User Manual
Configuring Your Internet Connection
1-7
v1.0, August 2010
3.
Enter the settings for the IP address and DNS server. If you enter or change a DNS address,
restart the computers on your network so that these settings take effect.
4.
If no login is required, you can specify the MAC Address setting.
5.
Click
Apply
to save your settings.
6.
Click
Test
to test your Internet connection. If the NETGEAR website does not appear within
one minute, see
Chapter 8, “Troubleshooting
”.
When your Internet connection is working, you do not need to launch the ISP’s login program on
your computer to access the Internet. When you start an Internet application, your wireless router
automatically logs you in.
The fields that are displayed depend on whether or not your Internet connection requires a login.
The following table explains the fields in the Basic Settings screen.
Figure 1-6
ISP
does
not
require login
ISP
does
require login
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top