Genie Advanced Home

31

R6300 WiFi Router 802.11ac Dual Band Gigabit

Setup Wizard

The NETGEAR Genie installation process is launched the first time you set up the router.

After you set up the router the first time, to use the Setup Wizard again, log in to the router

and select the Advanced tab.

1.

Select

Setup Wizard

to display the following screen:

2.

Select either

Yes

or

No, I want to configure the router myself

. If you select No, you are

taken to the Internet Setup screen (see

Internet Setup

on page

19).

3.

If you selected Yes, click

Next

. The following screen displays:

The Setup Wizard searches your Internet connection for servers and protocols to

determine your ISP configuration. The following screen displays:

Genie Advanced Home

32

R6300 WiFi Router 802.11ac Dual Band Gigabit

WPS Wizard

The WPS Wizard helps you add a WPS-capable client device (a wireless device or computer)

to your network. On the client device, either press its WPS button or locate its WPS PIN.

To use the WPS Wizard:

1.

Select

Advanced > WPS Wizard

.

2.

Click

Next

. The following screen lets you select the method for adding the WPS client (a

wireless device or computer).

You can use either the push button or PIN method.

3.

Select either

Push Button

or

PIN Number

.

•

To use the push button method, either click the

WPS

button on this screen, or press

the

WPS

button on the side of the router. Within 2 minutes, go to the wireless client

and press its

WPS

button to join the network without entering a password.

•

To use the PIN method, select the

PIN Number

radio button, enter the client security

PIN, and click

Next

.

Genie Advanced Home

33

R6300 WiFi Router 802.11ac Dual Band Gigabit

Within 2 minutes, go to the client device and use its WPS software to join the network

without entering a password.

The router attempts to add the WPS-capable device. The WPS LED

on the front of

the router blinks green. When the router establishes a WPS connection, the LED is solid

green, and the router WPS screen displays a confirmation message.

4.

Repeat Step 2 and Step 3 to add another WPS client to your network.

Setup Menu

Select

Advanced > Setup

to display the Setup menu. The following selections are available:

•

Internet Setup

. Go to the same Internet Setup screen that you can access from the

dashboard on the Basic Home screen. See

Internet Setup

on page

19.

•

Wireless Setup

. Go to the same Wireless Settings screen that you can access from the

dashboard on the Basic Home screen. See

Basic Wireless Settings

on page

25.

•

Guest Network

. This is a shortcut to the same Guest Network screen that you can

access from the dashboard on the Basic Home screen. See

Guest Networks

on page

28.

•

WAN Setup

. Internet (WAN) setup. See

WAN Setup

on page

34.

•

LAN Setup

. Local area network (LAN) setup. See

LAN Setup

on page

37.

•

QoS Setup

. Quality of Service (QoS) setup. See

Quality of Service (QoS) Setup

on

page

40.

Genie Advanced Home

34

R6300 WiFi Router 802.11ac Dual Band Gigabit

WAN Setup

The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the

Maximum Transmit Unit (MTU) size, and enable the router to respond to a ping on the WAN

(Internet) port. Select

Advanced > Setup > WAN Setup

to view the following screen:

•

Disable Port Scan and DoS Protection

. DoS protection protects your LAN against

denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, Teardrop Attack,

UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. This should be

disabled only in special circumstances.

•

Default DMZ Server

. This feature is sometimes helpful when you are playing online

games or videoconferencing. Be careful when using this feature because it makes the

firewall security less effective. See the following section,

Default DMZ Server

, for more

details.

•

Respond to Ping on Internet Port

. If you want the router to respond to a ping from the

Internet, select this check box. Use this setting only as a diagnostic tool because it allows

your router to be discovered. Do not select this check box unless you have a specific

reason.

•

Disable IGMP Proxying

. IGMP proxying allows a computer on the local area network

(LAN) to receive the multicast traffic it is interested in from the Internet. If you do not need

this feature, you can select this check box to disable it.

•

MTU Size (in bytes)

. The normal MTU (Maximum Transmit Unit) value for most Ethernet

networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some ISPs, you might

need to reduce the MTU. This is rarely required, and should not be done unless you are

sure it is necessary for your ISP connection. See

Change the MTU Size

on page

35.

•

NAT Filtering

. Network Address Translation (NAT) determines how the router processes

inbound traffic. Secured NAT provides a secured firewall to protect the computers on the

LAN from attacks from the Internet, but might prevent some Internet games, point-to-point

Genie Advanced Home

35

R6300 WiFi Router 802.11ac Dual Band Gigabit

applications, or multimedia applications from functioning. Open NAT provides a much

less secured firewall, but allows almost all Internet applications to function.

Default DMZ Server

The default DMZ server feature is helpful when you are using some online games and

videoconferencing applications that are incompatible with Network Address Translation

(NAT). The router is programmed to recognize some of these applications and to work

correctly with them, but there are other applications that might not function well. In some

cases, one local computer can run the application correctly if that computer’s IP address is

entered as the default DMZ server.

WARNING!

DMZ servers pose a security risk. A computer designated as the

default DMZ server loses much of the protection of the firewall

and is exposed to exploits from the Internet. If compromised, the

DMZ server computer can be used to attack other computers on

your network.

The router usually detects and discards Incoming traffic from the Internet that is not a

response to one of your local computers or a service that you have configured in the Port

Forwarding/Port Triggering screen. Instead of discarding this traffic, you can have the router

forward the traffic to one computer on your network. This computer is called the default DMZ

server.



To set up a default DMZ server:

1.

On the WAN Setup screen, select the

Default DMZ Server

check box.

2.

Type the IP address.

3.

Click

Apply

.

Change the MTU Size

The Maximum Transmission Unit (MTU) is the largest data packet a network device

transmits. When one network device communicates across the Internet with another, the data

packets travel through many devices along the way. If a device in the data path has a lower

MTU setting than the other devices, the data packets have to be split or “fragmented” to

accommodate the device with the smallest MTU.

The best MTU setting for NETGEAR equipment is often just the default value. In some

situations, changing the value fixes one problem but causes another. Leave the MTU

unchanged unless one of these situations occurs:

•

You have problems connecting to your ISP or other Internet service, and the technical

support of either the ISP or NETGEAR recommends changing the MTU setting. These

web-based applications might require an MTU change: