1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. C7000-100NAS
    5. /
  5. 2
Page 6 / 18 Scroll up to view Page 1 - 5
4
LED
Description
WiFi On/Off
button with LED
Pressing this button for two seconds turns the WiFi radios
in the modem router on and off. If this LED is lit, the WiFi
radios are on. If this LED is off, the WiFi radios are turned off
and you cannot use WiFi to connect to the modem router.
WPS button with
LED
This button lets you use WPS to join the WiFi network
without typing the WiFi password. The WPS LED blinks
during this process and then lights solid.
Install Your Modem Router
¾
To install your modem router:
1.
Connect a coaxial cable.
Use a coaxial cable that is provided by your cable company to
connect the cable port on the modem router to a cable wall
outlet or a line splitter.
Note:
For Xfinity cable Internet service, Comcast Xfinity recommends
connecting your modem router to a cable wall outlet.
2.
Connect the power adapter to the modem router and plug the
power adapter into an electrical outlet.
Page 7 / 18
5
Wait for the Power LED
and the Internet LED
to light
solid green.
3.
Connect a computer or WiFi device to the modem router.
To connect with WiFi, use the WiFi network name and password
on the product label.
For a wired connection, use an Ethernet cable to connect a
computer to an Ethernet port on the modem router.
4.
Launch a web browser and log in to the modem router.
The modem router menu displays.
If you do not see the modem router menu, enter
http://routerlogin.net
or
in the
address field of the web browser.
When prompted, enter
admin
for the user name and
password
for the password.
5.
Set up your Internet service.
For more information, see “
Set Up Your Internet Service
” on
page 6.
Page 8 / 18
6
Set Up Your Internet Service
Set up Internet service by using Comcast Xfinity’s self‑activation
process. If you are unable to self‑activate your modem router, call
Comcast Xfinity customer service. Aſter you complete the setup,
perform a speed test.
Use the Self-Activation Process to Set Up Your
Internet Connection
I
Before you start the self‑activation process, make sure that your
account number, account phone number, and login information
(your email address or user name and password) are nearby.
¾
To set up your Internet connection with Comcast Xfinity’s
self-activation process:
1.
Close all web browsers.
2.
Launch a web browser.
You are redirected to the Xfinity self‑activation page. If you are
not redirected to the Xfinity self‑activation page, visit
www.comcast.com/activate
.
3.
Provide your Xfinity credentials and complete the self‑
activation process.
This process might take up to 15 minutes, during which the
modem router reboots a couple of times.
Call Comcast Xfinity to Set Up Your Internet
Connection
If you are unable to self‑activate your modem router, call Comcast
Xfinity customer service.
Page 9 / 18
7
Before you call Comcast Xfinity, make sure that your account
number, account phone number, email address, and password are
nearby. The modem router’s model number is C7000. The serial
number and MAC address are on the product label.
¾
To set up your Internet connection by calling Comcast
Xfinity:
1.
Call Comcast Xfinity customer service at 1‑800‑XFINITY
(1‑800‑934‑6489).
2.
When asked, provide your account information and provide the
modem router’s model number and MAC address.
3.
Wait for the Comcast Xfinity representative to confirm that
your modem router is active.
4.
If you do not get an Internet connection with the modem
router, ask the Comcast Xfinity representative to look for your
modem router online, and do one of
the following depending
on what the Comcast Xfinity representative tells you about your
modem router:
•
If the modem router is not visible, the Comcast Xfinity
representative can give you instructions to verify why the
modem router does not connect with your high‑speed
Internet service.
•
If the modem router is visible to the Comcast Xfinity
representative, reboot the modem router. Check your
online status again.
Page 10 / 18
8
WiFi Network Name and Password
The preset WiFi network name (SSID) and password (network key)
are unique to your modem router, like a serial number. Because the
modem router automatically uses WiFi security, you don’t need to
set it up. The WiFi settings are on the product label.
NETGEAR recommends that you use the preset WiFi settings
because you can check the product label if you forget them.
NETGEAR genie lets you change these settings. If you do so, write
down the new WiFi settings and store them in a safe place.
You can write the WiFi settings from your product label in this space
for easy reference.
WiFi network name (SSID):
Network key (password):
If you change the WiFi settings, write the new settings here for
easy reference and store this booklet in a safe place.
WiFi network name (SSID):
Network key (password):

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top