1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. NF3ADV
    5. /
  5. 8
Page 36 / 89 Scroll up to view Page 31 - 35
www.netcommwireless.com
NF3ADV
–
Dual Band W
Port Triggering
Port triggering allows a client device connect
Port triggering opens an incoming port when
common port triggering settings come preco
checkbox.
OPTION
Trigger
Enter the o
Incoming Ports
Enter the in
range numb
Enable
Select this
Miscellaneous
The miscellaneous page gives the user the op
to the router as a DMZ host. A DMZ host is a
those ports otherwise forwarded.
WiFi Data and VoIP Gateway
ted to the router to dynamically and automatically forward
n your computer is using a specified outgoing port for spe
onfigured on the NF3ADV for easy setup and are listed in
Figure 29: Advanced - Forwarding Rules – Port Triggering
DEFINITION
outgoing trigger port be opened by a device connected to the router.
ncoming port number or port ranges. For a port range use a dash (-) betw
bers; e.g. 5000-6000. Use a comma between multiple numbers.
option to enable or disable the port triggering rule.
Table 22: Advanced - Forwarding Rules - Special AP settings
ption of enabling or disabling UPnP protocol or the optio
a host on the internal network that has all ports exposed
Figure 30: Advanced - Forwarding Rules - Miscellaneous
36
NF3ADV User Guide
d a specific port back to itself.
ecified traffic. A selection of
n Popular Applications
ween the lower and upper
on to assign a device connected
to a WAN connection, except
Page 37 / 89
NF3ADV User Guide
37
Security Se
The security settings menu has such configur
Blocking, MAC Control and Remote Administ
Status
The Security Settings Status page provides a
Packet Filtering
The inbound and outbound packet filtering fu
to be transmitted through to the WAN interfac
matching these rules will be denied or allowe
ettings
ration options for the NetComm NF3ADV as Packet Filte
tration settings.
an overview of the current IP filter and domain filter rules
Figure 31: Advanced - Security Settings - Status
unction gives the network administrator the option of den
ce when any of the specified rules are met. Conversely a
ed access through the network as specified by the netwo
Figure 32: Advanced – Security Settings - Packet Filtering
www.netcommwireless.com
ering, Domain Filtering, URL
in place on the NF3ADV.
nying or allowing data packets
any other data packets not
ork administrator.
Page 38 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
OPTION
Source IP
Enter the lo
sent to for a
Destination IP: Ports
Enter the W
Enable
Select this
Use Rule#
Select whe
Domain Filter
Domain Filtering can be used to monitor and
OPTION
Domain Filter
Select this
Log DNS Query
Select this
Privilege IP Addresses Range
Enter the ra
Domain Suffix
Enter the d
Drop
Select drop
Log
Select Log
Enable
Select this
WiFi Data and VoIP Gateway
DEFINITION
ocal source IP address where the packet originates from for an outgoing
an incoming packet filter rule.
WAN IP address and port number or range where the packet is directed t
option to make the packet filter rule active.
en the rule is to be used. The default value is Always.
Table 23: Advanced Security Settings - Packet Filtering Settings
or deny access to specified domain names.
Figure 33: Advanced – Security Settings - Domain Filter
DEFINITION
option to enable Domain Filtering
option to log DNS Queries for all specified domain names.
ange of IP addresses that will not be filtered.
domain name you wish to deny or have logged.
p if you wish to deny access to the specified domain name
if you wish to log any attempts to access the specified domain name.
option to enable the domain filter rule.
Table 24: Advanced - Security Settings - Domain Filter settings
38
NF3ADV User Guide
g packet filter rule or is being
to or from.
Page 39 / 89
NF3ADV User Guide
39
MAC Control
The MAC filter function can be used to restric
wired and wireless clients can connect to the
Using association control wireless clients can
denied association rights.
ct access to the NF3ADV for both wired and wireless clie
e router and either allow or deny any unspecified MAC ad
n associate to the wireless LAN. All other unspecified wire
Figure 34: Advanced - Security Settings - MAC Control
www.netcommwireless.com
ents. Using Connection Control
ddresses connection access.
eless clients can be allowed or
Page 40 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
URL Blocking
The URL blocking function can deny access
Miscellaneous
The Security Settings Miscellaneous section p
(Denial of Service) Attack Detection amongst
WiFi Data and VoIP Gateway
to specified URL addresses.
Figure 35: Advanced - Security Settings - URL Blocking
provides access to remote administration settings, admi
other things.
Figure 36: Advanced - Security Settings - Miscellaneous
40
NF3ADV User Guide
inistrator time out and DoS

Rate

4 / 5 based on 1 vote.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top