1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. NF3ADV
    5. /
  5. 7
Page 31 / 89 Scroll up to view Page 26 - 30
NF3ADV User Guide
31
Wireless 2.4 GHz
This page allows the user to configure the 2.4
types, wireless encryption, WDS (Wireless Dis
OPTION
Wireless Module (2.4GHz)
The option t
Network ID (SSID)
The SSID (S
wireless dev
can be up to
SSID Broadcast
Enabled by
to all wireles
detected by
Channel
The wireless
Wireless Mode: There are 6 modes to select from
802.11b/g mixed mode:
Both 802.11
802.11b only:
Select this if
802.11g only:
Select this if
802.11n only:
Select this if
802.11g/n Mixed mode:
Select this if
802.11/b/g/n Mixed mode:
Select this if
Authentication
This field allo
connection.
802.1x
This field giv
Encryption
With this fiel
selected.
Pre-shared Key
The wireless
4 GHz wireless settings on the NetComm NF3ADV includ
stributed System) settings and WPS (Wireless Protected
Figure 23: Advanced - Network Setup - Wireless 2.4 GHz
DEFINITION
to disable or enable the 2.4 GHz Wireless function.
Service Set Identifier) is the name of your wireless network. Use a unique
vice so that you can easily connect to it from your wireless clients. This fi
o 32 characters in length. It is recommended that the default SSID be ch
default, this field enables or disables the SSID broadcast, deciding whet
ss clients, requiring a manual configuration to connect to the network or
y wireless clients.
s frequency used by the 2.4 GHz connection. Recommended channels t
om:
1b and 802.11g wireless devices can connect to the NetComm NF3ADV
f all of your wireless clients use the 802.11b wireless protocol.
f all of your wireless clients use the 802.11g wireless protocol.
f all of your wireless clients use the 802.11n wireless protocol.
f 802.11g and 802.11n wireless devices access your network.
f 802.11b and 802.11g and 802.11n wireless devices access your netw
ows you to select the authentication type of the wireless security for the
.
ves the option to enable or disable the 802.1x authentication protocol.
ld the encryption that the wireless security will use on the 2.4 GHz wirele
s security password for the 2.4 GHz wireless network connection.
Table 18: Advanced - Network Setup - Wireless 2.4 GHz Settings
www.netcommwireless.com
ding the wireless security
d Setup) setup.
e name to identify your
ield is case sensitive and
hanged for added security.
ther the SSID will be hidden
whether the SSID can be
to use include 1, 6 and 11.
V.
work.
2.4 GHz wireless network
ess network can be
Page 32 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
WDS Settings
WDS (Wireless Distribution System) is a syste
network to be expanded using multiple acces
Access Point needs to be set with the same
will not be able to access the Access Points a
clients will only be possible through wired Eth
Enter the MAC address of each Remote Acce
WPS Setup
WiFi Protected Setup is a computer standard
configured using a push button method or by
OPTION
WPS
Enable or d
AP PIN
Set the Acc
Config Mode
Select from
Config Status
This field gi
the Set but
Config Method
Select whe
WPS Status
This field ad
WiFi Data and VoIP Gateway
em that enables the wireless interconnection of access p
ss points without using a wired backbone to link them. T
channel, SSID, encryption type and encryption key.
Plea
as the wireless functionality is used to create the wireles
hernet cable.
Figure 24: Advanced - Network Setup - Wireless – WDS
ess Point and press the Save button.
d that offers a quick and easy alternative to setting up a w
y using a PIN code.
Figure 25: Advanced - Network Setup - Wireless - WPS
DEFINITION
disable WPS with this field.
cess Point PIN by pressing the Generate New PIN button.
m being an enrollee or registrar. In most cases the router will be the regist
ives the current WPS status. Press either the Release button to release a
tton to configure the current WPS settings
ether WPS should use Push button or PIN Code mode for its configuratio
dvises the current WPS status.
Table 19: Advanced - Network Setup - Wireless - WPS Settings
32
NF3ADV User Guide
points, and allows a wireless
To successfully link each WDS
ase note that wireless clients
ss bridge. Network access for
wireless network. WPS can be
trar.
a configured WPS setting or
on.
Page 33 / 89
NF3ADV User Guide
33
Wireless 5.0 GHz
This page allows the user to configure the 5.0
types, wireless encryption, WDS (Wireless Dis
OPTION
Wireless Module (5.0GHz)
The option t
Network ID (SSID)
The SSID (S
wireless dev
can be up to
SSID Broadcast
Enabled by
to all wireles
detected by
Channel
The wireless
Wireless Mode: There are 3 modes to select from
802.11 A only:
Select this if
802.11 N only:
Select this if
802.11 A/N Mixed mode:
Select this if
Authentication
This field allo
connection.
802.1x
This field giv
Encryption
With this fiel
selected.
Pre-shared Key
The wireless
0 GHz wireless settings on the NetComm NF3ADV includ
stributed System) settings and WPS (Wireless Protected
Figure 26: Advanced - Network Setup - 5.0 GHz Wireless
DEFINITION
to disable or enable the wireless 5.0 GHz function.
Service Set Identifier) is the name of your wireless network. Use a unique
vice so that you can easily connect to it from your wireless clients. This fi
o 32 characters in length. It is recommended that the default SSID be ch
default, this field enables or disables the SSID broadcast, deciding whet
ss clients, requiring a manual configuration to connect to the network or
y wireless clients.
s frequency used by the 5.0 GHz connection. Recommended channels t
om using the 5 GHz frequency: A, N or mixed A/N mode
f all of your wireless clients use 802.11A wireless protocol.
f all of your wireless clients are 802.11N wireless protocol.
f both 802.11A and 802.11N wireless devices access your network.
ows you to select the authentication type of the wireless security for the
.
ves the option to enable or disable the 802.1x authentication protocol.
ld the encryption that the wireless security will use on the 5.0 GHz wirele
s security password for the 5.0 GHz wireless network connection.
Table 20: Advanced - Network Setup - 5.0 GHz Wireless Settings
www.netcommwireless.com
ding the wireless security
d Setup) setup.
e name to identify your
ield is case sensitive and
hanged for added security.
ther the SSID will be hidden
whether the SSID can be
to use include 1, 6 and 11.
5.0 GHz wireless network
ess network can be
Page 34 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
Change Password
This page allows you to change the administr
against unauthorized access.
WiFi Data and VoIP Gateway
rator username and password to secure the NetComm N
Figure 27: Advanced - Network Setup - Change Password
34
NF3ADV User Guide
NF3ADV management console
Page 35 / 89
NF3ADV User Guide
35
Forwarding
The forwarding rules section deals with NAT
AP settings can be used to configure port trig
enabled or disabled.
Virtual Server
The Virtual Server page allows you to direct in
internal server with a private IP address on th
to a different port number used by the server
pre-configured commonly used ports can be
OPTION
Service Ports
Enter the p
format show
Server IP
Enter the lo
Enable
Select this
Use Rule
Select whe
g Rules
traversal. Using the Virtual Server settings port forwardin
ggering. In the Miscellaneous section a DMZ host can be
ncoming traffic from the Internet side (identified by Proto
he LAN side. The Internal port is required only if the exter
r on the LAN side. A maximum of 20 entries can be confi
e selected for easy setup.
Figure 28: Advanced - Forwarding Rules - Virtual Server
DEFINITION
port number or port range to be used with the Server IP address. For a p
wn in the following example (81-90).
ocal IP address of the device you wish to port forward to.
option to enable the port forwarding rule.
en the port forwarding rule should be used. The default option is Always.
Table 21: Advanced - Forwarding Rules - Virtual Server Settings
www.netcommwireless.com
ng can be configured. Special
e configured and UPnP can be
ocol and External port) to the
rnal port needs to be converted
figured. In addition a series of
port range entry use the

Rate

4 / 5 based on 1 vote.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top