1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. NF3ADV
    5. /
  5. 4
Page 16 / 89 Scroll up to view Page 11 - 15
www.netcommwireless.com
NF3ADV
–
Dual Band W
In Step 6 of the NF3ADV Setup Wizard the ad
router management page. Enter the Desired
Password field to confirm the new password.
Review your settings then click “Finish” to sav
After clicking Finish, the NF3ADV will save yo
will be guided back to the management cons
WiFi Data and VoIP Gateway
dministration password for the router can be set to preve
Username and Desired Password, retyping the desired P
. Click Next to continue the setup wizard.
Figure 9: Setup Wizard Step 7 - Summary
ve configuration. Click “Back” if you want to make any c
our configuration and reboot. Please wait as this process
sole once the process is complete.
16
NF3ADV User Guide
ent unauthorized access to the
Password in the Retype
changes.
s takes about 2 minutes. You
Page 17 / 89
NF3ADV User Guide
17
Manageme
Procedure
After first time setup, the management conso
settings of your NetComm NF3ADV.
To log in to the management console, view th
1.
Open your web browser (e.g. Internet Ex
2.
Enter the username and password confi
and password “admin” if these details ha
Please note: If you forget the usern
button for over 10 seconds will res
Please note: In the event that your
the NetComm NF3ADV Manageme
ent Console Lo
ole will be password protected to prevent unauthorized a
he status and make changes to your NF3ADV, please fo
xplorer/Firefox/Safari) and navigate to http://192.168.1.1
igured during the first time setup and click the Submit bu
ave not been customized. Click “Login” to continue.
name and password you selected during the NF3ADV se
start the unit with the original settings (username: admin
r Internet connection becomes unavailable and no fail ov
ent console page will display when attempting to browse
Figure 10: Basic View – Login
www.netcommwireless.com
ogin
access to the configuration
ollow the steps below:
1
utton. Use the default username
et-up process, holding the reset
/ password: admin).
ver service has been configured,
e to an Internet site.
Page 18 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
Basic View - Status
The basic status page provides basic system
button from the top of the status page.
The status page shows the current primary In
(dBm), VoIP Status and number of wireless c
OPTION
Line Sync
The line syn
Sync Speed
The current
WAN IP Address
The current
3G Status
The current
3G Signal Strength
The current
VoIP Status
An indicatio
Number of Clients connected on
Wireless 2.4 Ghz
This field in
Number of Clients connected on
Wireless 5 GHz
This field in
WiFi Data and VoIP Gateway
m related information. It can be accessed by clicking on th
Figure 11: Basic View – Status
nternet connection, WAN/LAN status, MBB connection s
clients currently connected.
DEFINITION
nc status of the current ADSL WAN type set on the NF3ADV.
t downstream and upstream speed of the ADSL WAN type.
t IP Address that has been assigned to the WAN interface.
t status of the 3G connectivity is listed here.
t signal strength of the MBB (Mobile Broadband) service connection.
on as to whether the SIP settings have registered successfully.
ndicates how many wireless devices are connected on the NF3ADV’s 2.4
ndicates how many wireless devices are connected on the NF3ADV’s 5 G
Table 8: Basic View - Status Settings
18
NF3ADV User Guide
he “Switch to Basic view”
status, current Signal Strength
4 GHz wireless frequency.
GHz wireless frequency.
Page 19 / 89
NF3ADV User Guide
19
Basic View - 2.4 GHz W
This page allows you to configure basic 2.4 G
functionality, changing the 2.4 GHz Wireless
to the settings, click the “Save and apply cha
OPTION
Wireless (WiFi)
Changing this
your NF3ADV
SSID Broadcast
Select whethe
WiFi network Name
The SSID (Se
wireless devic
can be up to
Security Key:
Enter your ch
card and on t
on this page,
Wireless
Figure 12: Basic View - Wireless 2.4GHz
GHz WiFi settings for this device such as enabling/disabl
Network Name (SSID) or the 2.4 GHz Wireless Security
anges” button to make these changes active.
DEFINITION
s option to Off will turn off the WiFi feature on the NF3ADV and you will n
V wirelessly.
er the NF3ADV will broadcast the SSID (Network Name) for any wireless
ervice Set Identifier) is the name of your wireless network. Use a unique n
ce so that you can easily connect to it from your wireless clients. This fiel
32 characters long.
hosen Wireless Security key here. The default WPA-PSK key is printed on
the Product ID on the bottom of the NF3ADV. Please note that whilst the
the key will revert to the default if the NF3ADV is reset to factory default
Table 9: Basic View - 2.4GHz Wireless Settings
www.netcommwireless.com
ling the 2.4 GHz WiFi
key. If you make any changes
not be able to connect to
s device in range to detect.
name to identify your
ld is case sensitive and
n the wireless security
e key can be customized
settings.
Page 20 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
Basic View - 5.0 GHz W
This page allows you to configure basic 5.0 G
functionality, changing the 5.0 GHz Wireless
to the settings, click the “Save and apply cha
OPTION
Wireless (WiFi) ON/ OFF:
Changing this
your NF3ADV
SSID Broadcast
Select whethe
WiFi Network Name (SSID):
The SSID (Se
wireless devic
can be up to
Security key:
Enter your ch
card and on t
on this page,
WiFi Data and VoIP Gateway
Wireless
Figure 13: Basic View - 5.0 GHz Wireless
GHz WiFi settings for this device such as enabling/disabl
Network Name (SSID) or the 5.0 GHz Wireless Security
anges” button to make these changes active.
DEFINITION
s option to Off will turn off the WiFi feature on the NF3ADV and you will n
V wirelessly.
er the NF3ADV will broadcast the SSID (Network Name) for any wireless
ervice Set Identifier) is the name of your wireless network. Use a unique n
ce so that you can easily connect to it from your wireless clients. This fiel
32 characters long.
hosen Wireless Security key here. The default WPA-PSK key is printed on
the Product ID on the bottom of the NF3ADV. Please note that whilst the
the key will revert to the default if the NF3ADV is reset to factory default
Table 10: Basic View - 5.0 GHz Wireless Settings
20
NF3ADV User Guide
ling the 5.0 GHz WiFi
key. If you make any changes
not be able to connect to
s device in range to detect.
name to identify your
ld is case sensitive and
n the wireless security
e key can be customized
settings.

Rate

4 / 5 based on 1 vote.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top