Page 6 / 69 Scroll up to view Page 1 - 5
6
NetComm NF2 User Guide
www.netcommlimited.com
YML27
Product Introduction
Product Overview
Wireless WAN (where network is available) - GPRS/EDGE/WCDMA/HSDPA/HSUPA/CDMA2000/EVDO/LTE.
Ethernet WAN
PPPoE, DHCP client, Static IP, PPTP, L2TP
2 x USB 2.0 ports
for 3G/4G, USB storage.
2 x 3 internal WiFi antenna
1 x external WiFi antenna
IPv6 Support
Dual Stack IPv6, Static IPv6, DHCPv6, PPPOE, 6 to 4, IPv6 to IPv4 tunnel
3 x 10/100/1000Mbps LAN Ethernet ports.
1 x 10/100/1000Mbps WAN Ethernet port for optional alternate Internet connectivity (ADSL/Cable/Satellite).
802.11n up to 900Mbps Wireless
1
(Backward compatible with 802.11b/g/a).
2.4GHz and 5.0GHz Concurrent WiFi.
Supports auto Internet fallback from 3G to a fixed line WAN connection (ADSL/Cable/Satellite).
WiFi Protected Setup (WPS) for wireless connectivity.
Browser based interface for configuration and management.
Wireless security options- WEP/WPA/WPA-PSK/WPA2/WPA2-PSK.
VPN IPsec, VPN L2TPClient/Server, VPN PPTP Client/Server.
1.
Speeds are dependent on network coverage. See your MBB provider coverage maps for more details. The total number of WiFi users can also affect data speeds.
The maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n specifications. The actual wireless speed and
coverage are dependent on network and environmental conditions including but not limited to the volume of network traffic, building materials and
construction/layout.
Package Contents
The NF2 Hub package consists of:
1 x NF2 WiFi Router.
1 x 12VDC~1.5A Power Adapter.
1 x External Antenna.
1 x RJ-45 LAN Cable.
Quick Setup Guide.
Wireless Security Card.
Warranty Card.
If any of these items are missing or damaged, please contact your dealer immediately.
Product Features
The NetComm NF2 creates a secure WiFi network, providing Internet access for up to 15 users. Simply plug the NF2 into a power
outlet then insert a Mobile Broadband (MBB) dongle into the USB port on the side panel to access a high speed Internet connection
within minutes.
The NetComm NF2 incorporates a WLAN 802.11b/g/n access point, three 10/100/1000Mbps Gigabit Ethernet ports and one
10/100Mbps Ethernet WAN port. It features the latest security options such as WPA and WPA2 data encryption, SPI (Stateful
Packet Inspection) Firewall and VPN pass through.
Page 7 / 69
www.netcommlimited.com
NF2
Dual Band Wi-Fi Gigabit Hub User Guide
7
YML38
Physical Dimensions and
Indicators
LED Indicators
The NetComm NF2 has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The
display is visible on the front of the NF2 to provide you with information about network activity and the device status. See below for
an explanation of each of the indicator lights.
Table 2 - LED Indicators
LED
INDICATOR
ICON
COLOUR
DEFINITION
3G
Blue On
Connected via 3G/4G modem
Off
3G/4G is not configured or no dongle connected.
Blue Flashing
Connecting.
Red On
SIM Error
Red Flashing
Connection failed. Retrying.
WWW
Blue On
Connected via WAN Ethernet port.
Blue Blinking
WAN port traffic.
Red On
Connected via 3G/4G
Red Blinking
3G traffic.
Off
Internet connection not configured.
LAN1 - 4
Blue On
LAN connection is established.
Blue Blinking
Traffic on Ethernet port.
Off
Ethernet link is down.
WiFi
Blue On
WiFi is enabled.
Blue Flashing
WPS negotiation in process.
Blue Blinking
Traffic on the WiFi network.
Off
WiFi Disabled.
Power
Off
Powered off.
Blue Flashing
Device is starting up.
Blue On
Powered on.
Page 8 / 69
8
NetComm NF2 User Guide
www.netcommlimited.com
YML27
Integrated Interfaces
The following integrated interfaces are available on the rear of the NetComm NF2:
Table 3
Integrated Interface
INTERFACE
FUNCTION
WiFi Antenna
Attach the wireless antenna turning it in a clockwise direction.
WAN
The WAN Ethernet port for a Fixed Line (ADSL/Cable/Satellite) connection
to the internet.
On/Off
The power button for the NF2. Press once to switch the unit on or off.
LAN 1
The LAN 1 Port for wired Ethernet clients (Computers, Laptops, etc).
LAN 2
The LAN 2 Port for wired Ethernet clients (Computers, Laptops, etc).
LAN 3
The LAN 3 Port for wired Ethernet clients (Computers, Laptops, etc).
Power
The power connector designed for use with a DC 12V 1.5A Power
Adapter.
Reset
Hold this button down for over 10 seconds to reset the router to factory
default settings.
3G
Connect a 3G/4G USB modem here
USB Storage
Connect a USB based storage device here
Page 9 / 69
www.netcommlimited.com
NF2
Dual Band Wi-Fi Gigabit Hub User Guide
9
YML38
NF2 Default Settings
The following tables list the default settings for the NF2 Hub.
LAN (MANAGEMENT)
Static IP Address:
192.168.20.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.20.1
Table 3: LAN Management Default Settings
WAN (INTERNET)
WAN mode:
Dynamic IP
Table 4: WAN Port Default Settings
WIRELESS (WIFI)
SSID:
(Refer to the included wireless security card)
Security:
WPA-PSK/WPA2-PSK
Security Key:
(Refer to the included wireless security card)
Table 5: WiFi Default Settings
For security purposes, each NF2 comes with a unique SSID that varies by a 4 digit number at the end.
e.g. SSID: “
NetComm Wireless XXXX
NF2
™ HUB
WEB INTERFACE ACCESS
Username:
admin
Password:
admin
Table 6: Web Interface Default Settings
Page 10 / 69
10
NetComm NF2 User Guide
www.netcommlimited.com
YML27
Safety and Product Care
With reference to unpacking, installation, use and maintenance of your electronic device, the following basic guidelines are
recommended:
To avoid fire or shock hazard do not use or install this product near water. For example, near a bathtub, kitchen sink,
laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its
path and no heavy items should be placed on the cord. In addition, do not walk on, step on or mistreat the cord.
To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are
unobstructed.
WARNING
Disconnect the power line from the device before servicing.
Transport and Handling
When transporting the NetComm NF2, it is recommended to return the product in the original packaging. This ensures the product
will not be damaged.
In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent
damage during courier transport.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top