www.netcomm.com.au

11

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

Hardware installation

1.

Connect the power adapter to the Power socket on the back of the NB304N.

2.

Plug the power adapter into the wall socket and switch on the power.

3.

Wait approximately 60 seconds for the NB304N to power up.

Connecting via a cable

1.

Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NB304N.

2.

Connect the other end of the yellow Ethernet cable to your computer.

3.

Wait approximately 30 seconds for the connection to establish.

4.

Open your Web browser, and enter http://192.168.1.1 into the address bar and press enter.

5.

Follow the steps to set up your NB304N.

Connecting wirelessly

1.

Ensure Wi-Fi is enabled on your device (computer/laptop/Smartphone).

2.

Scan for wireless networks in your area and connect to the network name that matches the Wireless network name

configured on the NB304N.

Please note: The default Wireless network name is “NetComm Wireless”

3.

When prompted for your wireless security settings, enter the Wireless security key configured on the NB304N.

Please note: The default Wireless Security key is “a1b2c3d4e5”

4.

Wait approximately 30 seconds for the connection to establish.

5.

Open your Web browser, and enter http://192.168.1.1 into the address bar and press enter.

6.

Follow the steps to set up your NB304N.

NETCOMM GATEWAY™ SERIES –

NB304N – ADSL2+ Wireless N300 Modem Router

12

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

www.netcomm.com.au

Management Console Login

Procedure

To log in to the management console and view the status or make changes to your NB304N configuration, please follow the steps

below:

1.

Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to

2.

Enter the default username and password of “admin” (without the quotes) and click “OK”.

Management Console Menus

The Management Console offers the following menu items:



Device Info



Basic Setup



Advanced Setup



Wireless



Diagnostics



Management

These functions vary from viewing statistics and information about your NB304N to changing it’s configuration. Click on a menu

item to access the respective page.

www.netcomm.com.au

13

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

Device Info

The device info menu provides information and statistics about the NB304N and the currently configured network connections and

hosts.

Summary

The summary page provides an overview of the current operating parameters used by your NB304N. You can use this check your

firmware version or network connection information, such as your current Internet IP address or Internet connection speed as

shown below.

NETCOMM GATEWAY™ SERIES –

NB304N – ADSL2+ Wireless N300 Modem Router

14

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

www.netcomm.com.au

WAN

The WAN page displays a summary of the WAN connection settings and your WAN IP address (if applicable).

Statistics

Statistical information is provided and displayed broken down by network connection and type of connection. Please see the

following pages for an explanation of each these items.

www.netcomm.com.au

15

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

LAN

The LAN page displays information about computers or devices connected to the NB304N either by an Ethernet cable or via

wireless.

WAN Service

The WAN page displays information about the WAN connection in use by the NB304N. An entry will be shown for each configured

connection.