3. Connecting ENDSL-A2+4R2 Router via Ethernet and

USB

You can connect ENDSL-A2+4R router with PC through either Ethernet cable or USB

cable.

After connection is established, you can configure the host PC to be a DHCP client.

You have to repeat the same steps for every host PC on your network if you use DHCP

function on your router.

3.1 Setup ENDSL-A2+4R2 router via Ethernet Cable

If there is an available LAN card present on your PC, you just simply connect ADSL

router and PC through the Ethernet cable. Once you establish Internet connection, you could

browse the Web through the Ethernet cable.

3.2 Setup ENDSL-A2+4R2 router via USB Cable

You can connect the ENDSL-A2+4R2 router with PC via USB cable when there is no

LAN card present on your PC. USB cable acts as another LAN connection in this scenario.

Once you establish Internet connection, you could browse the Web through the USB cable.

USB Device Driver Installation for

Windows Vista/XP/2000/ME/98SE

Step 1:

Connect ENDSL-A2+R2 Router and PC with USB cable.

Step 2:

Once

“Found New Hardware Wizard”

window pops out, chooses

“Install from a list

or specific location (advanced)”

and click

“Cancel”

:

10

(Figure 1: For Windows Vista)

(Figure 2: For Windows 2000 and XP)

(Figure 3: For Windows 98SE and ME)

11

Step 3:

Insert the installation CD and the Easy Setup main page will appear as below,

Install USB Driver:

If router is connected through USB cable, click here to install USB driver.

Quick Setup:

If router is connected through Ethernet cable or after USB driver is loaded, click

here to set the ADSL Router.

USER MANUAL:

This CD provides Easy Setup and ADSL Router

.

Easy Setup

describes the

installation procedures via Quick Setup utility and

ADSL Router

describes detailed router

setup and configuration.

Adobe:

Click here to install Acrobat Reader.

(Acrobat 8 Reader for Windows Vista/XP; Acrobat 6 Reader for Windows 2000/ME/98SE)

Panda:

Click here to start Panda Anti Virus program.

(Panda only supports Windows XP/2000/ME/98SE OS).

Exit:

Click here to exit the installation procedures

12

Step 4:

If router is connected with USB cable, click

“Install USB Driver”

, the software kit will

automatically install USB driver. Please wait for a while during the configuration.

Step 5:

For

Windows XP

OS, Click “

Continue Anyway

” to process the next step.

13

Step 6:

After device installation has successfully installed ADSL USB Modem, click

“OK”

to

exit.

[Note]

In

Windows 98SE

Operation System, the setup program will ask restart the computer

to complete the installation. Please follow the below processes:

Step 6:

Click

“OK”

to restart your computer.

Step 7:

After system is rebooted, Insert Disk information window will show as below, click

“

OK

” to continue.

14

Step 8:

The program will automatically direct the program files which is necessary. Click “

OK

”

to continue.