16

Wireless settings allow you to set the wireless configuration items.

1.

Network ID (SSID)

: Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam

freely over this product and other Access Points that have the same Network ID. (The factory setting is

“

default

”

)

2.

Channel

: The radio channel number. The permissible channels depend on the Regulatory Domain.

The factory setting is as follow:

channel 6

for North America;

channel 7

for European (ETSI);

channel 7

for

Japan.

3.

WEP Security

: Select the data privacy algorithm you want. Enabling the security can protect your data while it

is transferred from one station to another. The standardized IEEE 802.11 WEP (128 or 64-bit) is used here.

4.

WEP Key 1, 2, 3 & 4

: When you enable the 128 or 64 bit WEP key security, please select one WEP key to be

used and input 26 or 10 hexadecimal (0, 1, 2

…

8, 9, A, B

…

F) digits.

5.

Pass-phrase Generator: Since hexadecimal characters are not easily

remembered, this device offers a conversion utility to convert a simple

word or phrase into hex.

6.

802.1X Setting

802.1X

Check Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the Wireless user

must

authenticate

to this router first to use the Network service.

RADIUS Server

IP address or the 802.1X server

’

s domain-name.

RADIUS Shared Key

Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the

RADIUS server.

Downloaded from

www.Manualslib.com

manuals search engine

17

WPA-PSK

1. Select Preshare Key Mode

If you select HEX,you have to fill in 64 hexadecimal (0, 1, 2

…

8, 9, A, B

…

F) digits

If ASCII,the length of preshare key is from 8 to 63.

2. Fill in the key, Ex 145678

WPA

Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must

authenticate

to this router first to use the Network service. RADIUS Server

IP address or the 802.1X server

’

s domain-name.

RADIUS Shared Key

Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the

RADIUS server.

Downloaded from

www.Manualslib.com

manuals search engine

18

4.3.3 WDS

The Wireless Distribution System (WDS) supports peer-to-peer AP communication. Select

Enable

to allow Bridge (WDS) mode between routers or

Disable

to block communication

between routers.

To enable

WDS

, set the

Wireless Bridging (WDS)

function to

Enable

. Enter the Wireless MAC

address of the router to communicate with in the form of two characters separated by a colon and

click

Save

.

4.3.4 Dynamic DNS

To host your server on a changing IP address, you have to use dynamic domain name service (DDNS).

So that anyone wishing to reach your host only needs to know the name of it. Dynamic DNS will map the name of

your host to your current IP address, which changes each time you connect your Internet service provider.

Before you enable

Dynamic DNS

, you need to register an account on one of these Dynamic DNS servers that we list

in

provider

field.

To enable

Dynamic DNS

click the check box next to

Enable

in the

DDNS

field.

Next you can enter the appropriate information about your Dynamic DNS Server.

Downloaded from

www.Manualslib.com

manuals search engine

19

You have to define:

Provider

Host Name

Username/E-mail

Password/Key

You will get this information when you register an account on a Dynamic DNS server.

4.3.5 DHCP Server

Press

“

More>>

”

The settings of a TCP/IP environment include host IP, Subnet Mask, Gateway, and DNS configurations. It is not easy

to manually configure all the computers and devices in your network. Fortunately, DHCP Server provides a rather

simple approach to handle all these settings. This product supports the function of DHCP server. If you enable this

product

’

s DHCP server and configure your computers as

“

automatic IP allocation

”

mode, then when your computer

is powered on, it will automatically load the proper TCP/IP settings from this product. The settings of DHCP server

include the following items:

Downloaded from

www.Manualslib.com

manuals search engine

20

1.

DHCP Server

: Choose

“

Disable

”

or

“

Enable.

”

2.

Lease Time:

Define the period of time for the IP address leased.

3.

IP pool starting Address/ IP pool starting Address

: Whenever there is a request, the DHCP

server will automatically allocate an unused IP address from the IP address pool to the requesting computer.

You must specify the starting and ending address of the IP address pool.

4.

Domain Name

: Optional, this information will be passed to the client.

5.

Primary DNS/Secondary DNS

: This feature allows you to assign DNS Servers

6.

Primary WINS/Secondary WINS

: This feature allows you to assign WINS Servers

7.

Gateway

: The Gateway Address would be the IP address of an alternate Gateway.

This function enables you to assign another gateway to your PC, when DHCP server

offers an IP to your PC.

4.3.6 Print Server

This item shows the print is ready or not.

Downloaded from

www.Manualslib.com

manuals search engine