VT2542 Voice Gateway User Guide

vi

Overview

Installation

Troubleshooting

Contact

FAQ

Glossary

License

Configuration:

Basic

Advanced

TCP/IP

Wireless

Important Safety Information

IMPORTANT SAFETY INSTRUCTIONS

—

when using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

•

Read all of the instructions listed here and/or in the user manual before you operate this device. Give

particular attention to all safety precautions. Retain the instructions for future reference.

•

This device must be installed and used in strict accordance with manufacturer's instructions as described in

the user documentation that is included with the device.

•

Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols

that are affixed to this device.

•

To prevent fire or shock hazard, do not expose this device to rain or moisture. The device must not be

exposed to dripping or splashing. Do not place objects filled with liquids, such as vases, on the device.

•

To prevent electric shock, this device may require a grounding conductor in the line cord. Connect the device

to a grounding type ac wall outlet using the power cord supplied with the device.

•

This device was qualified under test conditions that included the use of the supplied cables between systems

components. To ensure regulatory and safety compliance, use only the provided power and interface cables

and install them properly.

•

Different types of cord sets may be used for connections to the main supply circuit. Use only a main line cord

that complies with all applicable device safety requirements of the country of use.

•

Installation of this device must be in accordance with national wiring codes and conform to local regulations.

•

Operate this device only from the type of power source indicated on the device's marking label. If you are not

sure of the type of power supplied to your home, consult your dealer or local power company.

•

Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC

outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are

dangerous. They may result in a shock or fire hazard.

•

Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords where they are attached to plugs and convenience

receptacles, and examine the point where they exit from the device.

•

Place this device in a location that is close enough to an electrical outlet to accommodate the length of the

power cord.

•

Place device to allow for easy access when disconnecting the power cord of the device from the AC wall

outlet.

•

Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully

inserted with no part of the blades exposed.

•

Place this device on a stable surface.

•

It is recommended that the customer install an AC surge protector in the AC outlet to which this device is

connected. This is to avoid damaging the device by local lightning strikes and other electrical surges.

•

Postpone installation until there is no risk of thunderstorm or lightning activity in the area.

VT2542 Voice Gateway User Guide

vii

Overview

Installation

Troubleshooting

Contact

FAQ

Glossary

License

Configuration:

Basic

Advanced

TCP/IP

Wireless

•

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning. For added protection, unplug the device from the wall outlet and disconnect the

cables to avoid damage to this device due to lightning and power surges.

•

Do not cover the device, or block the airflow to the device with any other objects. Keep the device away from

excessive heat and humidity and keep the device free from vibration and dust.

•

Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners

directly on the device or use forced air to remove dust.

•

CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL Listed or CSA

Certified Telecommunication Line Cord, or national equivalent.

•

Disconnect TNV circuit connector(s) before disconnecting power.

•

Disconnect TNV circuit connector before removing cover.

•

Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a

wet basement, or near a swimming pool.

•

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning.

•

Do not use the telephone to report a gas leak in the vicinity of the leak.

•

Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible disposal instructions.

•

Upon completion of any service or repairs to this device, ask the service technician to perform safety checks

to determine that the device is in safe operating condition.

•

Do not open the device. Do not perform any servicing other than that contained in the installation and

troubleshooting instructions. Refer all servicing to qualified service personnel.

•

SAVE THESE INSTRUCTIONS

VT2542 Voice Gateway User Guide

viii

Overview

Installation

Troubleshooting

Contact

FAQ

Glossary

License

Configuration:

Basic

Advanced

TCP/IP

Wireless

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential environment. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the device and receiver.

•

Connect the device into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC CAUTION:

Any changes or modifications not expressly approved by Motorola for compliance could void the

user's authority to operate the equipment.

FCC Radiation Exposure Statement

IMPORTANT NOTE:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply

with the FCC RF exposure compliance requirements, the separation distance between the antenna and any

person's body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches).

This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are

firmware programmed at the factory to match the intended destinations. The firmware setting is not accessible by

the end user.

VT2542 Voice Gateway User Guide

ix

Overview

Installation

Troubleshooting

Contact

FAQ

Glossary

License

Configuration:

Basic

Advanced

TCP/IP

Wireless

Industry Canada (IC) Statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two

conditions:

1

This device may not cause interference, and

2

This device must accept any interference, including interference that may cause undesired operation of the

device.

This device has been designed to operate with the antennas listed below, and having a maximum gain of 2 dB.

Antennas not included in this list or having a gain greater than 2 dB are strictly prohibited for use with this device.

The required antenna impedance is 50 ohms.

This device has been designed to operate with the antenna shipped with the unit, Motorola part number

495088-001.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p) is not more than that permitted for successful communication.

IC Radiation Exposure Statement

IMPORTANT NOTE:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your

body.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Wireless LAN Information

•

This device is a wireless network product that uses Direct Sequence Spread Spectrum (DSSS) radio

technology. The device is designed to be inter-operable with any other wireless DSSS product that complies

with:

•

"The IEEE 802.11 Standard on Wireless LANs (Revision B and Revision G), as defined and approved by the

Institute of Electrical Electronics Engineers

•

"The Wireless Fidelity (Wi-Fi) certification as defined by the Wireless Ethernet Compatibility Alliance (WECA).

Restrictions on the Use of Wireless Devices

In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building

or responsible representatives of the organization. For example, using wireless equipment in any environment

where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the applicable policy for the use of wireless equipment in a specific organization or

environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment.

The manufacturer is not responsible for any radio or television interference caused by unauthorized modification

of the devices included with this product, or the substitution or attachment of connecting cables and equipment

other than specified by the manufacturer. Correction of the interference caused by such unauthorized

modification, substitution, or attachment is the responsibility of the user.

The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of

government regulations that may arise from failing to comply with these guidelines.

VT2542 Voice Gateway User Guide

x

Overview

Installation

Troubleshooting

Contact

FAQ

Glossary

License

Configuration:

Basic

Advanced

TCP/IP

Wireless

International Declaration of Conformity

We,

Motorola, Inc.

Connected Home Solutions

101 Tournament Drive

Horsham, PA 19044, USA

1.215.323.1000

declare under our sole responsibility that the

VT2542 Voice Gateway

To which the declaration relates is in conformity with the following standards:

EN 60950-1

EN 300 328

EN 301 489-1/-17

EN 50371

EN 61000-3-2

EN 61000-3-3

The following provisions of the Directive(s) of the Council of the European Union:

EMC Directive 89/336/EEC

Low Voltage Directive 73/23/EEC

R&TTE Directive 1999/5/EC

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

Restriction of the Use of Certain Hazardous Substances in Electrical Equipment (RoHS)

Directive 2002/95/EC

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose of the product with residential

or commercial waste.

Recycling your Motorola Equipment

Please do not dispose of this product with your residential or commercial waste. Some countries

or regions, such as the European Union, have set up systems to collect and recycle electrical

and electronic waste items. Contact your local authorities for information about practices

established for your region. If collection systems are not available, call Motorola Customer

Service for assistance.