User Manual v2.0

Page 16

of 57

4.

Select Network Tab

²

Interfaces

²

USB

Enter your APN if not listed and click on Save

User Manual v2.5

Page 17

of 57

WPS (Wi-Fi Protected Setup)

WPS button allows you to activate Wi-Fi Protected Setup

(WPS). When you press the WPS button it automatically

detects and connects wireless clients into the wireless

network by broadcasting the wireless network settings

from your Access Point to you wireless device/s.

To setup WPS:

Press the WPS button on the router for two seconds, or

until the LED blinks

Within 2 minutes, press the WPS button on the Wireless

Client.

Note that you must select WPA2-PSK Security Type for

this to be active. Note also that the WPS PIN is set to

dynamic and will change everything it is accessed in the

router.

Note:

WPS can only be used with wireless client devices that have a compatible WPS component.

User Manual v2.0

Page 18

of 57

ADD A NETWORK PRINTER

FOR WINDOWS 7

Click on the Start Button > Control Panel > Hardware and

Sound > Devices and Printers > Add a printer

Select Add a network, wireless Printer

Stop the Auto Detect and click on

"The printer that I want isn't listed"

User Manual v2.5

Page 19

of 57

Select: "Add

a printer using a TCP/IP address or

hostname" and press Next

User Manual v2.0

Page 20

of 57

For Device type: Select TCP/IP Device

Enter Hostname or IP address: 192.168.0.1

The Port Name should auto file with same: 192.168.0.1

You can leave the check box "Query the printer and

automatically select the driver to use" and then go Next

Windows should detect the settings

Select Custom Settings and leave everything as default: