MWN-WAPR300N

1

Chapter 1 Product Introduction

Thank you for purchasing the Medialink Wireless 300N Router!

This router is extremely easy to setup and easy to use. It supports 802.11n devices and

is backwards compatible with 802.11b/g devices. The router can support various types

simultaneously without slowing down your network.

The Medialink wireless router includes a router, wireless AP, four-port Fast Ethernet

(10/100) switch and firewall. It provides powerful online monitor functions and supports

URL filter and MAC filter. With WDS function, it can repeat and amplify wireless signals

from compatible Access Points so as to enlarge network coverage area. It supports

UPnP and WMM to make your audio and video streaming smooth. With QoS function, it

can efficiently distribute the data downloading from your ISP to the clients in your

network. The router also comes equipped with WISP (Wireless WAN) function to access

an ISP’s wireless hotspot or to create a new wireless network in addition to your existing

wireless network by wirelessly connecting to any existing wireless router.

1.1 Package Contents

Please verify the following items after you open the package:



One Wireless N Broadband Router



One Quick Installation Guide



One Power Adapter



One CD

If any of the listed items are missing or damaged, please contact the Medialink reseller

for immediate replacement.

1.2 LED Indicators and Port Description

Panel and LED indicators show:

LED indicator description on the front panel

MWN-WAPR300N

2

Back panel ports

MWN-WAPR300N

3

Back panel port description

MWN-WAPR300N

4

Chapter 2 Product Installation

1.

Please use only the included power adapter to power your router. (

NOTE

: Use of

an unmatched power adapter could cause damage to this product).

2. Please connect the router’s LAN port to your computer with an Ethernet cable and

connect your broadband line provided by your ISP to the router’s WAN port.

3. By default the Medialink router is set to use a Dynamic (DHCP) connection through

the WAN port so unless you have a DSL Modem that requires the router to use a PPPoE

type setup, then you will immediately have Internet access through the Medialink router.

If you have a PPPoE setup that requires a DSL Username and Password to be entered

into the router proceed to Step 4.

4. PPPoE Setup

a. Open any Internet browser such as Internet Explorer or Firefox.

b. In the address bar, type

, then hit “Enter” on your keyboard.

c. At the prompt enter the default Username (admin) and Password (admin).

d. Select “PPPoE”, enter your DSL Username and DSL Password provided by

your ISP and hit “Apply”

MWN-WAPR300N

5

Chapter 3 How to configure your computer’s Ethernet

(LAN) connection.

(Please note that most computers are already configured correctly

and do not require this step.)

3.1 How to Set the Network Configurations

Network Configurations under Windows XP

1. Right click “

My Network Places

” on your computer desktop and select “

Properties

”.

2.

Right click “

Local Area Connection

” and select “

Properties

”.

3.

Select “Internet Protocol (TCP/IP)” and click “Properties”.