Page 21 / 76
Scroll up to view Page 16 - 20
MWN-WAPR150N Wireless Router
IP Address:
192.168.0.XXX
：
(XXX is a number from 2~254)
Subnet Mask:
255.255.255.0
Gateway:
192.168.0.1
You need to input the DNS server address provided by your
ISP. Otherwise, you can use the Router’s default gateway as
the Preferred DNS proxy server. Click “
OK
” to save the
configurations.
3.2 Login to the Router
1.
To access the Router’s Web-based Graphical User
Interface (GUI) or if you are completing the configuration
of your router, you must first login to the router by
launching a web browser such as Internet Explorer or
Firefox and enter the Router’s default IP address,
Enter
”.
2
．
Input the “
admin
” in both User Name and Password.
17
Page 22 / 76
MWN-WAPR150N Wireless Router
Click “
OK
”.
3.
If you enter the correct user name and password, you
will see the “Welcome to Setup Wizard” screen.
a.
If you are logging in to the router to change
your settings, choose the setting you would
like to edit from the options to the left of the
browser window.
b.
Connect to ISP:
Click Next and the Setup Wizard
will guide you through to complete the installation of
your router.
18
Page 23 / 76
MWN-WAPR150N Wireless Router
4.
Configuring Your Wireless Network:
Once you have
completed the setup wizard, you may want to change your
SSID (Name of Wireless Network) and Security type to a
name and password that you will remember (the router’s
default SSID is “medialink”)
a.
Naming Your Wireless Network
:
Click
WLAN
Settings
, then click
Basic Settings
.
Change the
SSID name to a name that will identify your wireless
network (For example:
Smith or MyWireless.)
Then, Click
Apply
. (Screen will not change)
19
Page 24 / 76
MWN-WAPR150N Wireless Router
(For more details on your Basic Settings, open the
“Help_BasicWirelessSecuritySettings.pdf document
located in the User Guide folder on the CD.)
b.
Change your Security Type:
Click
WLAN
Settings
, then click
Security Settings
.
(For help
in
choosing
your
security
type
see
the
“Help_WirelessNetworkSecurity.pdf”
or
“Help_WEP_WPA_WPA2.pdf” document located in
the User Guide folder on the CD.)
Chapter 4 Quick Setup Guide
This chapter deals with how to install and configure your
router via the Web-based Graphical User Interface (GUI).
After you have completed the hardware installation steps in
Chapter 2.1 (pages 7-9), you may proceed to Chapter 4.1 to
run the router’s setup wizard through the web-based
interface rather than using the installation CD.
4.1 Setup Wizard
1.
Here is the “
Welcome to Setup Wizard
” for configuring
your Router quickly. Click “
Next
”.
20
Page 25 / 76
MWN-WAPR150N Wireless Router
2. In this screen, select the type of Internet connection you
use. If you are not sure, press the “
Detect
” button or
contact your Internet Service Provider, and click “
Next
”.
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and
click “
Next
”.
For example
：
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP
21
19216811.live